AT32UC3C1512C Automotive Atmel Corporation, AT32UC3C1512C Automotive Datasheet - Page 88

• Manufacturer Part Number: AT32UC3C1512C Automotive
• Manufacturer: Atmel Corporation

9166C–AVR-08/11
This allows the user to allocate separate handlers and priorities to the different interrupt types.
The interrupt request will be generated if the corresponding bit in the Interrupt Mask Register
(IMR) is set. Bits in IMR are set by writing a one to the corresponding bit in the Interrupt Enable
Register (IER), and cleared by writing a one to the corresponding bit in the Interrupt Disable
Register (IDR). The interrupt request remains active until the corresponding bit in the Interrupt
Status Register (ISR) is cleared by writing a one to the corresponding bit in the Interrupt Clear
Register (ICR).
• BOD50DET - 5V Brown out detection:
• BOD33DET - 3.3V Brown out detection:
• BODDET - 1.8V Brown out detection:
• PLL1LOCK - PLL1 locked:
• PLL0LOCK - PLL0 locked:
• RCOSC8MRDY - 8MHz / 1MHz RCOSC Ready:
• OSC32RDY - 32KHz Oscillator Ready:
• OSCR1DY - OSC1 Ready:
• OSCR0DY - OSC0 Ready:
– Set when a 0 to 1 transition on the PCLKSR.BOD50DET bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.BOD33DET bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.BODDET bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.PLL1LOCK bit is detected.
– Set when an 0 to 1 transition on the PCLKSR.PLL0LOCK bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.RCOSC8MRDY bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.OSC32RDY bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.OSC1RDY bit is detected.
– Set when a 0 to 1 transition on the PCLKSR.OSC0RDY bit is detected.
AT32UC3C
88