MCF5272VM66 Freescale Semiconductor, MCF5272VM66 Datasheet - Page 396

• Manufacturer Part Number: MCF5272VM66
• Description: IC MPU 66MHZ COLDFIRE 196-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF527xr

Specifications of MCF5272VM66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART, USB
• Peripherals: DMA, WDT
• Number Of I /o: 32
• Program Memory Size: 16KB (4K x 32)
• Program Memory Type: ROM
• Ram Size: 1K x 32
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 196-MAPBGA
• Family Name: MCF5xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 66MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 196
• Package Type: MA-BGA
• Cpu Speed: 66MHz
• Embedded Interface Type: UART, QSPI, USB, TDM
• Digital Ic Case Style: BGA
• No. Of Pins: 196
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Compliant

General Purpose I/O Module
17.2
The port control registers are used to configure all pins that carry signals multiplexed from different
on-chip modules. Each pin is configured with a two-bit field. Pin functions are referred to as
function 0b00–0b11. The function 0 signals corresponding to GPIO ports A and B are immediately
available after reset.
Wherever a signal function includes a GPIO port bit, the function defaults to an input after a reset and can
be read in the corresponding port data register.
Pin functions are generally grouped logically. For example, all UART1 signals are multiplexed with port
B and have the control register function code of 0b01.
There is no port C control register. Port C is enabled when the 16-bit-wide external data bus mode is
selected at reset by the input level on QSPI_DOUT/WSEL. The port D control register is used to configure
pins that have multiple functions (0b01 through 0b11) but no GPIO function.
17-2
0x0080
0x0084
0x0086
0x0088
0x008C
0x008E
0x0094
0x0096
0x0098
MBAR
Offset
Port Control Registers
Do not attempt to program a pin function that is not defined. Where no
function is defined, the function code is labeled ‘Reserved’ and is
considered invalid. Programming any control register field with a reserved
value has an unpredictable effect on the corresponding pin’s operation.
Reserved function codes cannot be reliably read. Attempts to read them
yield undetermined values.
Port C Data Direction Register (PCDDR)
Port B Data Direction Register (PBDDR)
Port A Data Direction Register (PADDR)
[31:24]
MCF5272 ColdFire
Reserved
Reserved
Reserved
Table 17-2. GPIO Port Register Memory Map
®
Integrated Microprocessor User’s Manual, Rev. 3
[23:16]
Port D Control Register (PDCNT)
Port B Control Register (PBCNT)
Port A Control Register (PACNT)
CAUTION
[15:8]
Port C Data Register (PCDAT)
Port B Data Register (PBDAT)
Port A Data Register (PADAT)
Reserved
Reserved
Reserved
Freescale Semiconductor
[7:0]