HFIXF1110CC.B3-998844 Cortina Systems Inc, HFIXF1110CC.B3-998844 Datasheet - Page 149

• Manufacturer Part Number: HFIXF1110CC.B3-998844
• Description: IC ETHERNET MAC 10PORT 552-CBGA
• Manufacturer: Cortina Systems Inc

Specifications of HFIXF1110CC.B3-998844

• Controller Type: Ethernet Controller, MAC
• Interface: SPI-4.2
• Voltage - Supply: 1.8 V, 2.5 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 575-BCBGA Exposed Pad (552 Bumps)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Other names: 1008-1010

IXF1110 MAC
Datasheet
250210, Revision 11.0
13 April 2009
Table 90
Table 91
Cortina Systems
RX FIFO Number of Frames Removed Ports 0 to 9 ($ 0x594 - 0x59D)
(Sheet 3 of 3)
RX FIFO Port Reset ($ 0x59E) (Sheet 1 of 2)
®
RX FIFO Number
of Frames
Removed on Port 7
RX FIFO Number
of Frames
Removed on Port 8
RX FIFO Number
of Frames
Removed on Port 9
1. R = Read Only; CoR = Clear on Read; W = Write; R/W = Read/Write.
2. For all Number of Frames Removed Registers, the following bit definitions apply to all ports (0:9):
Register Description: The soft reset register for each port in the RX block. Port ID = bit
position in the register. To make the reset active, the bit must be set High. For example, reset
of port 4 implies register value = 0001.0000. Setting the bit to 0 de-asserts the reset.
1. R = Read Only; CoR = Clear on Read; W = Write; R/W = Read/Write
IXF1110 10-Port 1000 Mbps Ethernet Media Access Controller
31:10
Bits 31:22 - Reserved and R.
Bits 21:0 - Described above.
Bit
9
8
Name
2
Reserved
RXFIFOPort 9
Reset
RXFIFOPort 8
Reset
Name
This register counts all frames removed from
the RX FIFO for port 7 by meeting one of the
following conditions:
This register counts all frames removed from
the RX FIFO for port 8 by meeting one of the
following conditions:
This register counts all frames removed from
the RX FIFO for port 9 by meeting one of the
following conditions:
• The RX FIFO on this port becomes full
• Frames are removed in conjunction with
• Frames are greater than the
• The RX FIFO on this port becomes full
• Frames are removed in conjunction with
• Frames are greater than the
• The RX FIFO on this port becomes full
• Frames are removed in conjunction with
• Frames are greater than the
the RX FIFO Errored Frame Drop Enable
Register (
Enable ($ 0x59F)
MaxFrameSize (
($ Port_Index + 0x0F)
the RX FIFO Errored Frame Drop Enable
Register (
Enable ($ 0x59F)
MaxFrameSize (
($ Port_Index + 0x0F)
the RX FIFO Errored Frame Drop Enable
Register (
Enable ($ 0x59F)
MaxFrameSize (
($ Port_Index + 0x0F)
Reserved
Port 9
0 = De-assert reset
1 = Reset
Port 8
0 = De-assert reset
1 = Reset
RX FIFO Errored Frame Drop
RX FIFO Errored Frame Drop
RX FIFO Errored Frame Drop
Description
Max Frame Size
Max Frame Size
Max Frame Size
)
)
)
)
)
)
Description
Address
0x59B
0x59C
0x59D
Type
R/W
R/W
Type
R
CoR
CoR
CoR
1
1
8.5 Memory Map
0x00000000
0x00000000
0x00000000
0x00000000
0x000000
Default
Default
0
0
Page 149