S9S12HZ128J3VAL Freescale Semiconductor, S9S12HZ128J3VAL Datasheet - Page 274

• Manufacturer Part Number: S9S12HZ128J3VAL
• Description: IC MCU FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12HZ128J3VAL

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: CAN, EBI/EMI, I²C, SCI, SPI
• Peripherals: LCD, Motor control PWM, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 6K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 112-LQFP
• Processor Series: S12HY
• Core: HCS12X
• Data Bus Width: 16 bit
• Data Ram Size: 6 KB
• Interface Type: CAN, I2C, SCI, SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 85
• Number Of Timers: 1
• Operating Supply Voltage: 4.5 V to 5.5 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 9 Motor Controller (MC10B8CV1)
9.4.1.2
The pair of motor controller channels cannot be placed into dual full H-bridge mode unless both motor
controller channels have been enabled (MCAM[1:0] not equal to 00) and dual full H-bridge mode is
selected for both PWM channels (MCOM[1:0] = 11). If only one channel is set to dual full H-bridge mode,
this channel will operate in full H-bridge mode, the other as programmed.
9.4.1.3
9.4.1.3.1
Each PWM channel can be programmed individually to three different alignment modes. The mode is
determined by the MCAM[1:0] bits in the corresponding channel control register.
Left aligned (MCAM[1:0] = 01): The output will start active (low if RECIRC = 0 or high if RECIRC = 1)
and will turn inactive (high if RECIRC = 0 or low if RECIRC = 1) after the number of counts specified by
the corresponding duty cycle register.
274
PWM Channel x + 1
PWM Channel x
Relationship Between PWM Mode and PWM Channel Enable
Relationship Between Sign, Duty, Dither, RECIRC, Period,
and PWM Mode Functions
PWM Alignment Modes
Figure 9-11. Typical Quad Half H-Bridge Mode Configuration
MnC0P
MnC0M
MnC1P
MnC1M
MC9S12HZ256 Data Sheet, Rev. 2.05
Released
PWM Output
Released
PWM Output
V
V
DDM
SSM
Freescale Semiconductor
V
V
DDM
SSM