s3c4510b Samsung Semiconductor, Inc., s3c4510b Datasheet - Page 249

• Manufacturer Part Number: s3c4510b
• Description: 16/32-bit Risc Microcontroller
• Manufacturer: Samsung Semiconductor, Inc.

S3C4510B
Bit Number
[14]
[15]
[16]
[17]
BDMA Rx enable (BRxEn)
BDMA Rx reset (BRxRS)
BDMA Rx buffer empty
interrupt enable (BRxEmpty)
BDMA Rx early notify
interrupt enable (BRxEarly)
Table 7-6. BDMA Receive Control Register Description (Continued)
Bit Name
When the Rx enable bit is set to "1", the BDMA Rx block is
enabled. Even if this bit is disabled, the MAC will receive Rx
data until the MAC Rx FIFO overflows (as long as the FIFO is
not empty and the MAC Rx is enabled). This bit is
automatically disabled in the following cases: 1) if the next
frame pointer is Null, or 2) if the owner bit is zero, and the
BRxSTSKO bit is set.
NOTE: The frame descriptor start address pointer must be
assigned before the BDMA Rx enable bit is set.
Set this bit to "1" to reset the BDMA Rx block.
Set this bit is "1" to enable the Rx buffer empty interrupt.
Set this bit to "1" to enable the Rx early notify interrupt. The
function of this interrupt is to note the length of a data frame
that is being received from its frame length field.
Description
ETHERNET CONTROLLER
7-27