YLCDRSK2378 Renesas Electronics America, YLCDRSK2378 Datasheet - Page 388

• Manufacturer Part Number: YLCDRSK2378
• Description: KIT DEV EVAL H8S/2378 LCD
• Manufacturer: Renesas Electronics America
• Series: H8®r

Specifications of YLCDRSK2378

• Main Purpose: Displays, LCD Controller
• Embedded: Yes, MCU, 16-Bit
• Utilized Ic / Part: YLCDRSK2378
• Primary Attributes: 5.7" QVGA, Touch Screen
• Secondary Attributes: Source Code on CD, Debugging Requires Emulator Cable E10A USB/JTAG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 7 DMA Controller (DMAC)
7.5.5
Single address mode can only be specified for channel B. This mode can be specified by setting
the SAE bit in DMABCRH to 1 in short address mode.
One address is specified by MAR, and the other is set automatically to the data transfer
acknowledge pin (DACK). The transfer direction can be specified by the DTDIR bit in DMACR.
Table 7.8 summarizes register functions in single address mode.
Table 7.8
Register
MAR specifies the start address of the transfer source or transfer destination as 24 bits. IOAR is
invalid; in its place the strobe for external devices (DACK) is output.
Figure 7.9 illustrates operation in single address mode (when sequential mode is specified).
Rev.7.00 Mar. 18, 2009 page 320 of 1136
REJ09B0109-0700
23
15
Single Address Mode
DACK pin
Register Functions in Single Address Mode
ETCR
MAR
0
0
DTDIR = 0 DTDIR = 1 Initial Setting
Source
address
register
Write
strobe
Transfer counter
Function
Destination
address
register
Read
strobe
Start address of
transfer destination
or transfer source
(Set automatically
by SAE bit; IOAR is
invalid)
Number of transfers See sections 7.5.2,
Operation
See sections 7.5.2,
Sequential Mode,
7.5.3, Idle Mode, and
7.5.4, Repeat Mode.
Strobe for external
device
Sequential Mode,
7.5.3, Idle Mode, and
7.5.4, Repeat Mode.