YLCDRSK2378 Renesas Electronics America, YLCDRSK2378 Datasheet - Page 454

• Manufacturer Part Number: YLCDRSK2378
• Description: KIT DEV EVAL H8S/2378 LCD
• Manufacturer: Renesas Electronics America
• Series: H8®r

Specifications of YLCDRSK2378

• Main Purpose: Displays, LCD Controller
• Embedded: Yes, MCU, 16-Bit
• Utilized Ic / Part: YLCDRSK2378
• Primary Attributes: 5.7" QVGA, Touch Screen
• Secondary Attributes: Source Code on CD, Debugging Requires Emulator Cable E10A USB/JTAG
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Section 8 EXDMA Controller (EXDMAC)
accessed next. Bits SAT1 and SAT0 in EDACR specify incrementing or decrementing. The
address is fixed when SAT1 = 0, incremented when SAT1 = 1 and SAT0 = 0, and decremented
when SAT1 = 1 and SAT0 = 1.
The size of the increment or decrement is determined by the size of the data transferred. When the
DTSIZE bit in EDMDR = 0, the data is byte-size and the address is incremented or decremented
by 1; when DTSIZE = 1, the data is word-size and the address is incremented or decremented by
2.
When a repeat area setting is made, the operation conforms to that setting. The upper part of the
address set for the repeat area function is fixed, and is not affected by address updating.
When EDSAR is read during a transfer operation, a longword access must be used. During a
transfer operation, EDSAR may be updated without regard to accesses from the CPU, and the
correct values may not be read if the upper and lower words are read separately. In a longword
access, the EXDMAC buffers the EDSAR value to ensure that the correct value is output.
Do not write to EDSAR for a channel on which a transfer operation is in progress.
EXDMA Destination Address Register (EDDAR): When the EDDAR address is accessed as the
transfer destination, after the EDDAR value is output, EDDAR is updated with the address to be
accessed next. Bits DAT1 and DAT0 in EDACR specify incrementing or decrementing. The
address is fixed when DAT1 = 0, incremented when DAT1 = 1 and DAT0 = 0, and decremented
when DAT1 = 1 and DAT0 = 1.
The size of the increment or decrement is determined by the size of the data transferred. When the
DTSIZE bit in EDMDR = 0, the data is byte-size and the address is incremented or decremented
by 1; when DTSIZE = 1, the data is word-size and the address is incremented or decremented by
2.
When a repeat area setting is made, the operation conforms to that setting. The upper part of the
address set for the repeat area function is fixed, and is not affected by address updating.
When EDDAR is read during a transfer operation, a longword access must be used. During a
transfer operation, EDDAR may be updated without regard to accesses from the CPU, and the
correct values may not be read if the upper and lower words are read separately. In a longword
access, the EXDMAC buffers the EDDAR value to ensure that the correct value is output.
Do not write to EDDAR for a channel on which a transfer operation is in progress.
Rev.7.00 Mar. 18, 2009 page 386 of 1136
REJ09B0109-0700