HD6412240 RENESAS [Renesas Technology Corp], HD6412240 Datasheet - Page 543

• Manufacturer Part Number: HD6412240
• Description: Renesas 16-Bit Single-Chip Microcomputer H8S Family / H8S/2200 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

[6] If an error signal is sent back from the receiving end after transmission of one frame is
[7] The TEND bit in SSR is not set for a frame for which an error signal indicating an abnormality
[8] If an error signal is not sent back from the receiving end, the ERS bit in SSR is not set.
[9] If an error signal is not sent back from the receiving end, transmission of one frame, including
Retransfer operation when SCI is in transmit mode
Figure 13.12 illustrates the retransfer operation when the SCI is in transmit mode.
completed, the ERS bit in SSR is set to 1. If the RIE bit in SCR is enabled at this time, an ERI
interrupt request is generated. The ERS bit in SSR should be kept cleared to 0 until the next
parity bit is sampled.
is received.
a retransfer, is judged to have been completed, and the TEND bit in SSR is set to 1. If the TIE
bit in SCR is enabled at this time, a TXI interrupt request is generated.
If data transfer by the DTC by means of the TXI source is enabled, the next data can be written
to TDR automatically. When data is written to TDR by the DTC, the TDRE bit is
automatically cleared to 0 if DISEL in DTC is 0 and the transfer counter value is not 0.
Ds
TDRE
TEND
FER/ERS
Transfer to TSR from TDR
D0 D1 D2 D3 D4 D5 D6 D7 Dp DE
nth transfer frame
Figure 13.12 Retransfer Operation in SCI Transmit Mode
[6]
[7]
Ds D0 D1 D2 D3 D4 D5 D6 D7 Dp
Transfer to TSR from TDR
Retransferred frame
Rev.3.00 Mar. 26, 2007 Page 501 of 772
Section 13 Smart Card Interface
(DE)
[8]
[9]
Ds D0 D1 D2 D3 D4
Transfer to TSR
REJ09B0355-0300
from TDR
Transfer
frame n+1