PM8611-BIAP PMC [PMC-Sierra, Inc], PM8611-BIAP Datasheet - Page 72

• Manufacturer Part Number: PM8611-BIAP
• Manufacturer: PMC [PMC-Sierra, Inc]

11
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2010883, Issue 2
Normal Mode Register Description
Normal mode registers are used to configure and monitor the operation of the SBSLITE. Normal
mode registers (as opposed to test mode registers) are selected when A[8] is set low.
Notes on Normal Mode Register Bits
1. Writing values into unused register bits has no effect. However, to ensure software
2. All configuration bits that can be written into can also be read back. This allows the
3. Writeable normal mode register bits are cleared to logic zero upon reset unless otherwise
4. Writing into read-only normal mode register bit locations does not affect SBSLITE operation
compatibility with future, feature-enhanced versions of this product, unused register bits must
be written with logic zero. Reading back unused bits can produce either a logic one or a logic
zero; hence, unused register bits should be masked off by software when read.
processor controlling the SBSLITE to determine the programming state of the block.
noted.
unless otherwise noted.
SBSLITE™ Telecom Standard Product Data Sheet
Preliminary
71