MT29F128G08WAAC6 Micron, MT29F128G08WAAC6 Datasheet - Page 73

• Manufacturer Part Number: MT29F128G08WAAC6
• Description: NAND Flash Memory
• Manufacturer: Micron

Interleaved TWO-PLANE PROGRAM PAGE Operation
Interleaved TWO-PLANE PROGRAM PAGE CACHE MODE Operations
Interleaved READ for INTERNAL DATA MOVE Operations
Interleaved TWO-PLANE READ for INTERNAL DATA MOVE Operations
PDF: 09005aef8278ee3f / Source: 09005aef81f17540
16gb_nand_mlc_l52a__2.fm -Rev. D 5/08 EN
Figure 48 on page 74 shows how to perform interleaved TWO-PLANE PROGRAM PAGE
operations. The TWO-PLANE/MULTIPLE-DIE READ STATUS (78h) command is used to
monitor the status register for operation completion.
The interleaved TWO-PLANE PROGRAM PAGE operation must meet two-plane address-
ing requirements. See “Two-Plane Addressing” on page 55 for details.
RANDOM DATA INPUT (85h) is permitted during interleaved TWO-PLANE PROGRAM
PAGE operations.
Figure 49 on page 75 shows how to perform interleaved TWO-PLANE PROGRAM PAGE
CACHE MODE operations. The status register is monitored with the TWO-PLANE/MUL-
TIPLE-DIE READ STATUS (78h) command.
The interleaved TWO-PLANE PROGRAM PAGE CACHE MODE operation must meet
two-plane addressing requirements. See “Two-Plane Addressing” on page 55 for details.
RANDOM DATA INPUT (85h) is permitted during interleaved TWO-PLANE PROGRAM
PAGE CACHE MODE operations.
Figure 50 on page 76 shows how to perform interleaved READ for INTERNAL DATA
MOVE operations. In Figure 50, the status register is monitored for operation comple-
tion with the TWO-PLANE/MULTIPLE-DIE READ STATUS (78h) command.
The READ for INTERNAL DATA MOVE operations must operate within the same plane.
RANDOM DATA OUTPUT (05h-E0h) commands are permitted during interleaved READ
for INTERNAL DATA MOVE operations.
Figure 51 on page 77 shows how to perform interleaved TWO-PLANE READ for INTER-
NAL DATA MOVE operations. In Figure 51, the TWO-PLANE/MULTIPLE-DIE READ STA-
TUS (78h) command is used to monitor the status register for operation completion.
The interleaved TWO-PLANE READ for INTERNAL DATA MOVE operation must meet
two-plane addressing requirements. See “Two-Plane Addressing” on page 55 for details.
The TWO-PLANE READ for INTERNAL DATA MOVE operations must operate within the
same plane.
RANDOM DATA OUTPUT (05h-E0h) is permitted during interleaved TWO-PLANE READ
for INTERNAL DATA MOVE operations to change the column address within a plane.
TWO-PLANE RANDOM DATA OUTPUT (06h-E0h) is permitted during interleaved TWO-
PLANE READ for INTERNAL DATA MOVE operations to change planes and column
addresses between the planes.
Micron Confidential and Proprietary
73
www.DataSheet.net/
16, 32, 64, 128Gb NAND Flash Memory
Micron Technology, Inc., reserves the right to change products or specifications without notice.
Command Definitions
©2005 Micron Technology, Inc. All rights reserved.
Datasheet pdf - http://www.DataSheet4U.co.kr/