MCF5307AI90B Freescale Semiconductor, MCF5307AI90B Datasheet - Page 377

• Manufacturer Part Number: MCF5307AI90B
• Description: IC MPU 32BIT COLDF 90MHZ 208FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF530xr

Specifications of MCF5307AI90B

• Core Processor: Coldfire V3
• Core Size: 32-Bit
• Speed: 90MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, POR, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 208-FQFP
• Maximum Clock Frequency: 90 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Family Name: MCF5xxx
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 90MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 3.3V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 208
• Package Type: FQFP
• Program Memory Size: 8KB
• Cpu Speed: 90MHz
• Embedded Interface Type: I2C, UART
• Digital Ic Case Style: FQFP
• No. Of Pins: 208
• Supply Voltage Range: 3V To 3.6V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.4.3 Bus Driven (BD)
The MCF5307 asserts BD to indicate that it is the current master and is driving the bus. The
MCF5307 behaves as follows:
17.5 Clock and Reset Signals
The clock and reset signals configure the MCF5307 and provide interface signals to the
external system.
17.5.1 Reset In (RSTI)
Asserting RSTI causes the MCF5307 to enter reset exception processing. When RSTI is
recognized, BR and BD are negated and the address bus, data bus, TT, SIZ, R/W, AS, and
TS are three-stated. RSTO is asserted automatically when RSTI is asserted.
17.5.2 Clock Input (CLKIN)
CLKIN is the MCF5307 input clock frequency to the on-board phase-locked-loop (PLL)
clock generator. CLKIN is used to internally clock or sequence the MCF5307 internal bus
interface at a selected multiple of the input frequency used for internal module logic.
17.5.3 Bus Clock Output (BCLKO)
The internal PLL generates BCLKO and can be programmed to be 1/2, 1/3, or 1/4 of the
processor clock frequency. BCLKO should be used as the bus timing reference.
17.5.4 Reset Out (RSTO)
After RSTI is asserted, the PLL temporarily loses its lock, during which time RSTO is
asserted. When the PLL regains its lock, RSTO negates again. This signal can be used to
reset external devices.
17.5.5 Data/Configuration Pins (D[7:0])
This section describes data pins, D[7:0], that are read at reset for configuration. Table 17-11
shows pin assignments.
• If the MCF5307 is the bus master but is not using the bus, BD is asserted.
• If the MCF5307 loses mastership during a transfer, it completes the last transfer of
• If the MCF5307 loses bus mastership during an idle clock cycle, it three-states all
• BD cannot be negated unless BG is negated.
the access, negates BD, and three-states all bus signals on the rising edge of
BCLKO.
bus signals on the rising edge of BCLKO.
Freescale Semiconductor, Inc.
For More Information On This Product,
Chapter 17. Signal Descriptions
Go to: www.freescale.com
Clock and Reset Signals
17-13