HD64F7047F50 Renesas Electronics America, HD64F7047F50 Datasheet - Page 242

• Manufacturer Part Number: HD64F7047F50
• Description: IC SUPERH MCU FLASH 256K 100QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

10.4.2
In synchronous operation, the values in a number of TCNT counters can be rewritten
simultaneously (synchronous presetting). Also, a number of TCNT counters can be cleared
simultaneously by making the appropriate setting in TCR (synchronous clearing).
Synchronous operation enables TGR to be incremented with respect to a single time base.
Channels 0 to 4 can all be designated for synchronous operation.
Example of Synchronous Operation Setting Procedure: Figure 10.11 shows an example of the
synchronous operation setting procedure.
Rev. 2.00, 09/04, page 200 of 720
[1] Set to 1 the SYNC bits in TSYR corresponding to the channels to be designated for synchronous
[2] When the TCNT counter of any of the channels designated for synchronous operation is written to,
[3] Use bits CCLR2 to CCLR0 in TCR to specify TCNT clearing by input capture/output compare, etc.
[4] Use bits CCLR2 to CCLR0 in TCR to designate synchronous clearing for the counter clearing source.
[5] Set to 1 the CST bits in TSTR for the relevant channels, to start the count operation.
<Synchronous presetting>
Synchronous presetting
Synchronous operation
operation.
the same value is simultaneously written to the other TCNT counters.
Set synchronous
Set TCNT
Synchronous Operation
operation
selection
Figure 10.11 Example of Synchronous Operation Setting Procedure
[1]
[2]
Synchronous clearing
<Counter clearing>
source generation
clearing source
Select counter
Start count
channel?
Clearing
Yes
No
[3]
[5]
<Synchronous clearing>
Set synchronous
counter clearing
Start count
[4]
[5]