FX1S-30MR-ES/UL MITSUBISHI, FX1S-30MR-ES/UL Datasheet - Page 319

• Manufacturer Part Number: FX1S-30MR-ES/UL
• Description: PLC, 16 IN, 14 RELAY OUT, 110V/2
• Manufacturer: MITSUBISHI

Specifications of FX1S-30MR-ES/UL

• No. Of Analogue Inputs: 16
• No. Of Analogue Outputs: 14
• Ip/nema Rating: IP10
• Approval Bodies: CE, CUL, UL
• External Depth: 49mm
• External Length / Height: 90mm
• External Width: 60mm
• Mounting Type: Panel

8.
8.1
FX Series Programmable Controllers
PLC Device Tables
Performance Specification Of The FX
continued over the page....
Counters (C)
counters (C)
State relays
Operation processing time
High speed
Operation control method
Timers (T)
Programming language
Auxiliary
(M coils)
(S coils)
Number of instructions
relay
I/O control method
Program capacity
I/O configuration
Item
A/B phase
100 msec
stop input
10 msec
c/w start
General
Latched
General
General
Latched
1 phase
1 phase
2 phase
Special
1 msec
Initial
Range: -2,147,483,648 to
+2,147,483,647 counts
FX0: Select upto four 1 phase counters
with a combined counting frequency of
5kHz or less.
Alternatively select one 2 phase or A/B
phase counter with a counting fre-
quency of 2kHz or less.
FX0S: When multiple 1-phase counters
are used the sum of the frequencies
must be equal or less than 14kHz. Only
1, 2 phase high speed counter may be
used at any one time. When 2 phase
counters are in use the maximum
counted speeds must be equal or less
than 14kHz, calculated as (2 ph
counter speed 5 number of counted
edges) + 1 ph counter speeds.
Relay symbolic language + step ladder Step ladder can be used to produce an
Batch processing method (when END
Basic sequence instructions: 29
Range: 0.001 to 32.767 sec
Range: 1 to 32,767 counts
Step ladder instructions: 2
Range: 0 to 3,276.7 sec
Applied instructions: 85
instruction is executed)
Range: 0 to 327.67 sec
128 points (subset)
10 points (subset)
16 points(subset)
Specification
256 points
128 points
384 points
63 points
31 points
16 points
2K steps
1 point
Applied instructions: 1.65 to several 100 s
Max total I/O set by Main Processing Unit
1S
Cyclic operation by stored program
Basic instructions: 0.55 to 0.7 s
T32 to T62 when special M coil M8028
Provided by built in EEPROM memory
C246, C247 and C249 (all latched) 3
C251, C252 and C254 (all latched) 3
A Maximum 116 applied instructions
are available including all variations
I/O refresh instruction is available
From the range M8000 to M8255
C241(latched), C242 and C244
Type: 16 bit up counter
Type: 16 bit up counter
(note C235 is latched)
SFC style program
(latched) 3 points
C235 to C238
M384 to M511
is driven ON
M0 to M383
S0 to S127
C16 to C31
Remarks
C0 to C15
T0 to T55
S0 to S9
4 points
points
points
PLC Device Tables 8
T63
8-1