ATUC128L4U Atmel Corporation, ATUC128L4U Datasheet - Page 892

• Manufacturer Part Number: ATUC128L4U
• Manufacturer: Atmel Corporation

Specifications of ATUC128L4U

• Flash (kbytes): 128 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 50 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 17
• Hardware Qtouch Acquisition: Yes
• Max I/o Pins: 36
• Ext Interrupts: 36
• Usb Transceiver: 1
• Usb Speed: Full Speed
• Usb Interface: Device
• Spi: 1
• Twi (i2c): 2
• Uart: 4
• Lin: 4
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 12
• Adc Speed (ksps): 460
• Analog Comparators: 8
• Resistive Touch Screen: No
• Temp. Sensor: Yes
• Crypto Engine: No
• Sram (kbytes): 16
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: Yes
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.62 to 3.6
• Operating Voltage (vcc): 1.62 to 3.6
• Fpu: No
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 18
• Input Capture Channels: 12
• Pwm Channels: 35
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

32142A–12/2011
The status is 0x00 and all data read are valid. An unsuccessful four byte read can look like this:
The error occurred after reading 2 bytes on the SAB. The rest of the bytes read are undefined.
The status byte indicates the error and the bytes remaining indicates how many bytes were
remaining to be sent of the data field of the packet when the error occurred.
Table 34-51. MEMDATA Status Byte
Table 34-52. MEMDATA Details
status byte
0x00
0x01
0x02
Other
Response
Response value
Additional data
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xBA
8. 0xBE (Data LSB)
9. 0x00 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x00 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
1. 0x55 (sync)
2. 0xC1 (command)
3. 0x00 (length MSB)
4. 0x07 (length LSB)
5. 0xCA (Data MSB)
6. 0xFE
7. 0xXX (An error has occurred. Data read is undefined. 5 bytes remaining of the Data
8. 0xXX (More undefined data)
9. 0x02 (Status byte)
10. 0x00 (Bytes remaining MSB)
11. 0x05 (Bytes remaining LSB)
12. 0xXX (CRC MSB)
13. 0xXX (CRC LSB)
field)
Description
Read successful
SAB busy
Bus error (wrong address)
Reserved
Details
0xC1
Data read, status byte, and byte count (2 bytes)
ATUC64/128/256L3/4U
892