MC68302EH16C Freescale Semiconductor, MC68302EH16C Datasheet - Page 222

• Manufacturer Part Number: MC68302EH16C
• Description: IC MPU MULTI-PROTOCOL 132-PQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68302EH16C

• Processor Type: M683xx 32-Bit
• Speed: 16MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 132-MQFP, 132-PQFP
• Controller Family/series: 68K
• Core Size: 32 Bit
• Ram Memory Size: 1152Byte
• Cpu Speed: 16MHz
• No. Of Timers: 3
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: PQFP
• Rohs Compliant: Yes
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 16MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 132
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

Communications Processor (CP)
When a BD has been completely transmitted, the transmit CRC (TC) bit is checked in the
BD. If set, the DDCMP controller appends one of the block checks: CRC1, CRC2, or CRC3
for the header field, data message, or control messages, respectively. Next, the DDCMP
controller writes the buffer's status bits into the BD and clears the ready bit in the BD. It then
proceeds to the next BD in the table. When the last bit (L) is set and the TC bit is set in that
BD, the DDCMP controller appends the CRC2 block check to the data field. This bit is also
used for transmitting CRC3 in control messages. Next, it writes the buffer status bits into the
BD and clears the ready bit. Finally, on synchronous links, either SYN1–SYN2 pairs or
IDLEs (as programmed in the DDCMP mode register) are transmitted. When the end of the
current BD has been reached and the last bit is not set (working in multibuffer mode or send-
ing back-to-back messages), only the status bits are written. In either case, when a BD has
been completely transmitted, an interrupt is issued if the interrupt (I) bit in the BD is set and
the event is not masked in the DDCMP mask register. The appropriate setting of the I bit in
each BD allows the user to be interrupted after transmission of each buffer, a specific buffer,
or each message.
4.5.14.2 DDCMP Channel Frame Reception Processing.
The DDCMP receiver is also designed to work with almost no intervention from the M68000
core (see Figure 4-35).
The DDCMP receiver performs automatic SYN1–SYN2 synchronization on synchronous
links and start/stop synchronization on asynchronous links. Automatic message synchroni-
zation is achieved by searching for the special starting characters SOH, ENQ, or DLE and
making address comparisons with a mask. When the M68000 core enables the DDCMP re-
ceiver on synchronous links, it enters hunt mode. In this mode, as data is shifted into the
receiver shift register one bit at a time, the contents of the register are compared to the
SYN1–SYN2 fields of the data synchronization register (see 4.5.4 SCC Data Synchroniza-
tion Register (DSR)). If the two are not equal, the next bit is shifted in, and the comparison
is repeated. When the registers match, hunt mode is terminated, and character assembly
4-102
SYN1 SYN2
SYN1 SYN2
ADDRESS
CRC
Figure 4-35. DDCMP Transmission/Reception Summary
THE SYNCHRONIZATION CHARACTERS ARE
AUTOMATICALLY INSERTED AND STRIPPED BY THE SCC.
THE SCC WILL CHECK THE DDCMP ADDRESS FIELD ON RECEPTION
AND WRITE IT INTO THE RECEIVE BUFFER. THE ADDRESS FIELD IS
PRESENT IN THE FIRST TRANSMIT BUFFER.
THE CRC IS TRANSMITTED WHEN REQUESTED AND CHECKED ON
RECEPTION. IT IS WRITTEN TO THE RECEIVE BUFFERS.
HEADER FIELDS
PRESENT IN FIRST
TRANSMIT BUFFER
PRESENT IN FIRST
RECEIVE BUFFER
MC68302 USER’S MANUAL
ADDRESS
CRC
PRESENT IN SECOND
PRESENT IN SECOND
TRANSMIT BUFFER
RECEIVE BUFFER
DATA
MOTOROLA
CRC