MC68302EH16C Freescale Semiconductor, MC68302EH16C Datasheet - Page 236

• Manufacturer Part Number: MC68302EH16C
• Description: IC MPU MULTI-PROTOCOL 132-PQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68302EH16C

• Processor Type: M683xx 32-Bit
• Speed: 16MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 132-MQFP, 132-PQFP
• Controller Family/series: 68K
• Core Size: 32 Bit
• Ram Memory Size: 1152Byte
• Cpu Speed: 16MHz
• No. Of Timers: 3
• Embedded Interface Type: SCP, TDM
• Digital Ic Case Style: PQFP
• Rohs Compliant: Yes
• Family Name: M68000
• Device Core: ColdFire
• Device Core Size: 32b
• Frequency (max): 16MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 5V
• Operating Temp Range: 0C to 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 132
• Package Type: PQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

Communications Processor (CP)
4.5.15.1 Bit Rate Adaption of Synchronous Data Signaling Rates up to 19.2 kbps
The V.110 synchronous bit rate adaption block diagram within the terminal adaptor is shown
in Figure 4-38.
This function may be implemented with two SCCs, one of which is configured for V.110 op-
eration. Step 1 (RA1) rate adaption can be achieved using one SCC channel programmed
to promiscuous (totally transparent) mode (see 4.5.13 BISYNC Controller). This SCC will
transfer the data between the R interface and IMP memory. The M68000 core must be pro-
grammed to format the data in memory according to the V.110 protocol to create the V.110
80-bit frame. Another SCC is used to transfer the data between IMP memory and the S/T
interface. This SCC should be programmed for V.110 operation, which provides the conver-
sion of the data rate to 64 kbps. Data may be transmitted and received on 1, 2, or 4 bits of
an ISDN B channel as programmed in the SIMASK register.
4.5.15.2 Rate Adaption of 48- and 56-kbps User Rates to 64 kbps
This function may again be implemented with two SCCs; however, in this case, the SCC
connected to the B channel is programmed to promiscuous (totally transparent) mode rather
than for V.110 operation (see 4.5.9 SCC Transparent Mode). The M68000 core will need to
format the framing pattern in the 48-kbps conversion case. For the 56-kbps rate conversion,
however, the B channel mask (SIMASK) in the serial channel physical interface can be
used.
4-116
V-SERIES
R
V.110 contains a requirement (under further study) for control in-
formation on the R interface (i.e., RTS, CTS, CD, DTR, and
DSR), conveyed by the S bits in the V.110 frame, not to have a
different transmission delay than the user data conveyed by the
D8–D1 bits. This very time-critical aspect of the standard is not
supported by the IMP. In this case, provision would need to be
made by the user to guarantee correct sampling times for this in-
formation to correspond with the user data. The IMP, however,
can detect changes in these signals and issue appropriate inter-
rupts to the M68000 core, allowing the function to be fully imple-
mented in a slightly longer time period.
Figure 4-38. Two-Step Synchronous Bit Rate Adaption
STEP 1
RA1
V
(2**k)*8
MC68302 USER’S MANUAL
kbps
NOTE
(2**k)*8
kbps
STEP 2
RA2
kbps
64
S/T
MOTOROLA