HD6417660 RENESAS [Renesas Technology Corp], HD6417660 Datasheet - Page 496

• Manufacturer Part Number: HD6417660
• Description: Renesas 32-Bit RISC Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

5. When sampling rate is 1/27
16.3.10 FIFO Control Register (SCFCR)
SCFCR is a 16-bit readable/writable register that resets the data count and sets the trigger data
number for the transmit and receive FIFO registers, and also contains a loopback test enable bit.
Rev. 1.00, 02/04, page 458 of 804
Bit
15
14
13 to 11
Error (%) =
Bit Name
TSE
TCRST

(1+N) × B × 54 × 2
Initial
Value
0
0
All 0
Pφ × 10
R/W
R/W
R/W
R
6
2n-1
Description
Transmit Data Stop Enable
Enables or disables the transmit data stop function.
This function is enabled only in asynchronous mode.
Since this function is not supported in clock synchronous
mode, clear this bit to 0 in clock synchronous mode.
0: Transmit data stop function disabled
1: Transmit data stop function enabled
Transmit Count Reset
Clears the transmit count to 0. This bit is valid only when
the transmit data stop function is used.
0: Transmit count reset disabled*
1: Transmit count reset enabled (clearing to 0)
Note:* The transmit count is reset (clearing to 0) is
Reserved
These bits are always read as 0. The write value should
always be 0. If 1 is written to these bits, correct operation
cannot be guaranteed.
- 1 × 100
performed in power-on reset or manual reset.