AT91SAM7S256D-AU Atmel, AT91SAM7S256D-AU Datasheet - Page 515

• Manufacturer Part Number: AT91SAM7S256D-AU
• Description: ARM Microcontrollers - MCU 256K Flash SRAM 64K ARM based MCU
• Manufacturer: Atmel
• Series: SAM7S256r

Specifications of AT91SAM7S256D-AU

• Rohs: yes
• Core: ARM
• Processor Series: AT91SAM
• Data Bus Width: 16 bit/32 bit
• Maximum Clock Frequency: 55 MHz
• Program Memory Size: 256 KB
• Data Ram Size: 64 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3 V to 3.6 V
• Operating Temperature Range: - 40 C to + 85 C
• Package / Case: LQFP-64
• Mounting Style: SMD/SMT
• Interface Type: 2-Wire, I2S, SPI, USART
• Length: 7 mm

35.5.3
35.5.3.1
A USB device has several possible states. Refer to Chapter 9 of the Universal Serial Bus Specification, Rev 2.0.
Figure 35-14. USB Device State Diagram
Movement from one state to another depends on the USB bus state or on standard requests sent through control
transactions via the default endpoint (endpoint 0).
After a period of bus inactivity, the USB device enters Suspend Mode. Accepting Suspend/Resume requests from
the USB host is mandatory. Constraints in Suspend Mode are very strict for bus-powered applications; devices
may not consume more than 500 µA on the USB bus.
While in Suspend Mode, the host may wake up a device by sending a resume signal (bus activity) or a USB device
may send a wake up request to the host, e.g., waking up a PC by moving a USB mouse.
The wake up feature is not mandatory for all devices and must be negotiated with the host.
Self powered devices can detect 5V VBUS using a PIO as described in the typical connection section. When the
device is not connected to a host, device power consumption can be reduced by disabling MCK for the UDP, dis-
abling UDPCK and disabling the transceiver. DDP and DDM lines are pulled down by 330 KΩ resistors.
Controlling Device States
Not Powered State
Reset
Interruption
Power
Deconfigured
Deconfigured
Hub Reset
Device
or
Configured
Attached
Powered
Address
Default
Configured
Configured
Assigned
Address
Hub
Device
Reset
Bus Inactive
Bus Inactive
Bus Inactive
Bus Inactive
Bus Activity
Bus Activity
Bus Activity
Bus Activity
Suspended
Suspended
Suspended
Suspended
SAM7S Series [DATASHEET]
6175M–ATARM–26-Oct-12
515