DF2328BVF25V Renesas Electronics America, DF2328BVF25V Datasheet - Page 823

• Manufacturer Part Number: DF2328BVF25V
• Description: IC H8S MCU FLASH 256K 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of DF2328BVF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 87
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: HD64F2328BVF25V

19.13
19.13.1 Features
The H8S/2328B F-ZTAT has 256 kbytes of on-chip flash memory. The features of the flash
memory are summarized below.
• Four flash memory operating modes
• Programming/erase methods
• Programming/erase times
• Reprogramming capability
• On-board programming modes
• Automatic bit rate adjustment
• Flash memory emulation by RAM
• Protect modes
⎯ Program mode
⎯ Erase mode
⎯ Program-verify mode
⎯ Erase-verify mode
The flash memory is programmed 128 bytes at a time. Erasing is performed by block erase (in
single-block units). To erase the entire flash memory, the individual blocks must be erased
sequentially. Block erasing can be performed as required on 4-kbyte, 32-kbyte, and 64-kbyte
blocks.
The flash memory programming time is 10.0 ms (typ.) for simultaneous 128-byte
programming, equivalent to 78 µs (typ.) per byte, and the erase time is 50 ms (typ.).
The flash memory can be reprogrammed minimum 100 times.
There are two modes in which flash memory can be programmed/erased/verified on-board:
⎯ Boot mode
⎯ User program mode
With data transfer in boot mode, the bit rate of the chip can be automatically adjusted to match
the transfer bit rate of the host.
Part of the RAM area can be overlapped onto flash memory, to emulate flash memory updates
in real time.
There are three protect modes, hardware, software, and error protect, which allow protected
status to be designated for flash memory program/erase/verify operations.
Overview of Flash Memory (H8S/2328B F-ZTAT)
Rev.6.00 Sep. 27, 2007 Page 791 of 1268
REJ09B0220-0600
Section 19 ROM