R5S72611 RENESAS [Renesas Technology Corp], R5S72611 Datasheet - Page 242

• Manufacturer Part Number: R5S72611
• Description: 32-Bit RISC Microcomputer SuperHTM RISC engine Family / SH7260 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Section 9 Bus State Controller (BSC)
Note:
9.3.2
In this LSI the data bus width of area 0 can be set to 8, 16, or 32 bits through external pins during
a power-on reset. The data bus widths of areas 1 to 6 can be modified through register settings
during program execution. Note that the selectable data bus widths may be limited depending on
the connected memory type.
After a power-on reset, the LSI starts execution of the program stored in the external memory
allocated in area 0.
For details on pin function settings, see section 25, Pin Function Controller (PFC).
Table 9.3
Rev. 2.00 Sep. 07, 2007 Page 210 of 1312
REJ09B0320-0200
Internal Address
H'40000000 to H'4FFFFFFF
H'50000000 to H'E7FFFFFF
H'E8000000 to H'EFFFFFFF
H'F0000000 to H'FF3FFFFF
H'FF400000 to H'FFF7FFFF
H'FFF80000 to H'FFFBFFFF
H'FFFC0000 to H'FFFFFFFF
MD1
1
0
*
Data Bus Width and Pin Function Setting for Individual Areas
For the on-chip RAM space, access the addresses shown in section 26, On-Chip RAM.
For the on-chip peripheral module space, access the addresses shown in section 30,
List of Registers. Do not access addresses which are not described in these sections.
Otherwise, correct operation cannot be guaranteed.
Correspondence between External Pin (MD1 and MD0) Settings and Data Bus
Width
MD0
1
0
1
0
Space
CS6
Other
Other
Other
Other
Other
Other
32 bits
16 bits
8 bits
Reserved (setting prohibited)
Data Bus Width
Memory to be Connected
Normal space
Reserved area*
On-chip peripheral modules, reserved
area*
Cache address array space, reserved
area*
On-chip peripheral modules, reserved
area*
On-chip RAM, reserved area*
On-chip peripheral modules, reserved
area*
Cache-
Cache
disabled
—
—
—
—
—
—