AT91SAM9M10-CU Atmel, AT91SAM9M10-CU Datasheet - Page 461

• Manufacturer Part Number: AT91SAM9M10-CU
• Description: IC MCU 16/32BIT ARM9 324TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9M10-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: 2-Wire, SPI, USART
• Maximum Clock Frequency: 133 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 2 x 16 bit
• Operating Supply Voltage: 1.65 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9M10-G45-EK
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• Cpu Family: AT91
• Device Core: ARM926EJ-S
• Device Core Size: 32b
• Frequency (max): 400MHz
• Total Internal Ram Size: 64KB
• # I/os (max): 160
• Number Of Timers - General Purpose: 7
• Operating Supply Voltage (typ): 1.8/2.5/3.3V
• Operating Supply Voltage (max): 1.1/1.95/3.6V
• Operating Supply Voltage (min): 0.9/1.65/1.8/3V
• On-chip Adc: 8-chx10-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 324
• Package Type: TFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

30.4.12
6355B–ATARM–21-Jun-10
Programmable I/O Delays
If a write access in a write-protected register is detected, then the WPVS flag in the PIO Write
Protect Status Register (PIO_WPSR) is set and the field WPVSRC indicates in which register
the write access has been attempted.
The WPVS flag is automatically reset after reading the PIO Write Protect Status Register
(PIO_WPSR).
List of the write-protected registers:
The PIO interface consists of a series of signals driven by peripherals or directly by sofware. The
simultaneous switching outputs on these busses may lead to a peak of current in the internal
and external power supply lines.
In order to reduce the peak of current in such cases, additional propagation delays can be
adjusted independently for pad buffers by means of configuration registers, PIO_DELAY.
For each I/O, the additional programmable delays range from 0 to 4 ns (Worst Case PVT). The
delay can differ between IOs supporting this feature. The delay can be modified according to
programming for each I/O. The minimum additional delay that can be programmed on a PAD
supporting this feature is 1/16 of the maximum programmable delay.
Only PADs PC[12], PC[7:2], PA[30:23] and PA[9:2] can be configured.
When programming 0x0 in fields, no delay is added (reset value) and the propagation delay of
the pad buffers is the inherent delay of the pad buffer. When programming 0xF in field, the prop-
agation delay of the corresponding pad is maximal.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
“PIO Enable Register” on page 466
“PIO Disable Register” on page 466
“PIO Output Enable Register” on page 467
“PIO Output Disable Register” on page 468
“PIO Input Filter Enable Register” on page 469
“PIO Input Filter Disable Register” on page 469
“PIO Set Output Data Register” on page 470
“PIO Clear Output Data Register” on page 471
“PIO Multi-driver Enable Register” on page 474
“PIO Multi-driver Disable Register” on page 475
“PIO Pull Up Disable Register” on page 476
“PIO Pull Up Enable Register” on page 476
“PIO Peripheral A Select Register” on page 477
“PIO Peripheral B Select Register” on page 478
“PIO Output Write Enable Register” on page 479
“PIO Output Write Disable Register” on page 479
AT91SAM9M10
461