DF2239TF16I Renesas Electronics America, DF2239TF16I Datasheet - Page 137

• Manufacturer Part Number: DF2239TF16I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2239TF16I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2239TF16I; HD64F2239TF16I

2.4.5
Reset exception handling loads the CPU’s program counter (PC) from the vector table, clears the
trace bit in EXR to 0, and sets the interrupt mask bits in CCR and EXR to 1. The other CCR bits
and the general registers are not initialized. In particular, the stack pointer (ER7) is not initialized.
The stack pointer should therefore be initialized by an MOV.L instruction executed immediately
after a reset.
Bit
2
1
0
Initial Values of CPU Registers
Bit Name
Z
V
C
Initial Value
undefined
undefined
undefined
R/W
R/W
R/W
R/W
Description
Zero Flag
Set to 1 to indicate zero data, and cleared to 0
to indicate non-zero data.
Overflow Flag
Set to 1 when an arithmetic overflow occurs,
and cleared to 0 at other times.
Carry Flag
Set to 1 when a carry occurs, and cleared to 0
otherwise. Used by:
•
•
•
The carry flag is also used as a bit accumulator
by bit manipulation instructions.
Add instructions, to indicate a carry
Subtract instructions, to indicate a borrow
Shift and rotate instructions, to indicate a
carry
Rev. 6.00 Mar. 18, 2010 Page 75 of 982
REJ09B0054-0600
Section 2 CPU