DF2239TF16I Renesas Electronics America, DF2239TF16I Datasheet - Page 583

• Manufacturer Part Number: DF2239TF16I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2239TF16I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2239TF16I; HD64F2239TF16I

Bit
0
Bit Name
ACK
Initial
Value
0
R/W
R/W
Description
Indicates the data received in the acknowledge bit of the
data field.
•
•
Note: This flag is invalid in broadcast communications.
[Setting condition]
When the acknowledge bit of 1 (NAK) is detected
[Clearing condition]
When writing 0 after reading ACK = 1
Acknowledge bit Status
Acknowledge bit other than in the data field
The IEB terminates the transmission and enters the
wait state if a NAK is received. In this case, this bit and
the TxE flag are set to 1.
Acknowledge bit in the data field
The IEB retransmits data up to the maximum number of
bytes defined by communications mode until an ACK is
received from the receive unit if a NAK is received from
the receive unit during data field transmission. In this
case, when an ACK is received from the receive unit
during retransmission, this flag is not set and
transmission will be continued. When transmission is
terminated without receiving an ACK, this flag is set to
1.
Section 14 IEBus™ Controller (IEB) [H8S/2258 Group]
Rev. 6.00 Mar. 18, 2010 Page 521 of 982
REJ09B0054-0600