DF2239TF16I Renesas Electronics America, DF2239TF16I Datasheet - Page 618

• Manufacturer Part Number: DF2239TF16I
• Description: MCU 3V 384K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2200r

Specifications of DF2239TF16I

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: I²C, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2239TF16I; HD64F2239TF16I

Section 15 Serial Communication Interface (SCI)
Rev. 6.00 Mar. 18, 2010 Page 556 of 982
REJ09B0054-0600
Bit
6
5
4
Bit Name
BLK
PE
O/E
Initial
Value
0
0
0
R/W
R/W
R/W
R/W
Description
When this bit is set to 1, the SCI operates in block
transfer mode. For details on block transfer mode,
refer to section 15.7.3, Block Transfer Mode.
0: Normal smart card interface mode operation
•
•
•
1: Operation in block transfer mode
•
•
•
Parity Enable (enabled only in asynchronous
mode)
When this bit is set to 1, the parity bit is added to
transmit data in transmission, and the parity bit is
checked in reception. In Smart Card interface
mode, this bit must be set to 1.
Parity Mode (enabled only when the PE bit is 1 in
asynchronous mode)
0: Selects even parity.
1: Selects odd parity.
For details on setting this bit in Smart Card
interface mode, refer to section 15.7.2, Data
Format (Except for Block Transfer Mode).
(initial value)
Error signal transmission, detection, and
automatic data retransmission are performed.
The TXI interrupt is generated by the TEND
flag.
The TEND flag is set 12.5 etu (11.0 etu in the
GSM mode) after transmission starts.
Error signal transmission, detection, and
automatic data retransmission are not
performed.
The TXI interrupt is generated by the TDRE
flag.
The TEND flag is set 11.5 etu (11.0 etu in the
GSM mode) after transmission starts.