R0K572115S000BE Renesas Electronics America, R0K572115S000BE Datasheet - Page 548

• Manufacturer Part Number: R0K572115S000BE
• Description: KIT STARTER FOR SH7211
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: Microcontrollerr

Specifications of R0K572115S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7211
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

10.4.10 MTU2–MTU2S Synchronous Operation
(1)
The counters in the MTU2 and MTU2S which operate at different clock systems can be started
synchronously by making the TCSYSTR settings in the MTU2.
(a)
Figure 10.83 shows an example of synchronous counter start setting procedure.
Rev. 3.00 Mar. 04, 2009 Page 522 of 1168
REJ09B0344-0300
MTU2–MTU2S Synchronous Counter Start
Example of MTU2–MTU2S Synchronous Counter Start Setting Procedure
MTU2-MTU2S synchronous
Set the necessary operation
<Counter operation starts>
Figure 10.83 Example of Synchronous Counter Start Setting Procedure
Stop count operation
Set TCSYSTR
counter start
[3]
[1]
[2]
[1] Use TSTR registers in the MTU2 and MTU2S and halt the
[2] Specify necessary operation with appropriate registers such as
[3] In TCSYSTR in the MTU2, set the bits corresponding to the
Notes: 1. Even if a bit in TCSYSTR corresponding to an operating
counters used for synchronous start operation.
TCR and TMDR.
counters to be started synchronously to 1. The TSTRs are
automatically set appropriately and the counters start
synchronously.
2. To start channels 3 and 4 in reset-synchronized PWM
counter is cleared to 0, the counter will not stop. To stop
the counter, clear the corresponding bit in TSTR to 0
directly.
mode or complementary PWM mode, make appropriate
settings in TCYSTR according to the TSTR setting for
the respective mode. For details, refer to section 10.4.7,
Reset-Synchronized PWM Mode, and section 10.4.8,
Complementary PWM Mode.