R0K572115S000BE Renesas Electronics America, R0K572115S000BE Datasheet - Page 637

• Manufacturer Part Number: R0K572115S000BE
• Description: KIT STARTER FOR SH7211
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: Microcontrollerr

Specifications of R0K572115S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7211
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Table 12.2 shows output-level comparisons with pin combinations.
Table 12.2 Pin Combinations
Pin Combination
PB18/TIOC3B and PB19/TIOC3D
PB4/TIOC4A and PB6/TIOC4C
PB5/TIOC4B and PB7/TIOC4D
PB21/TIOC3BS and PB20/TIOC3DS
PB12/TIOC4AS and PB10/TIOC4CS
PB13/TIOC4BS and PB11/TIOC4DS
I/O
Output The high-current pins for the MTU2 are placed in
Output The high-current pins for the MTU2S are placed in
Description
high-impedance state when the pins
simultaneously output an active level for one or
more cycles of the peripheral clock (Pφ). (In the
case of TOCS = 0 in timer output control register 1
(TOCR1) in the MTU2, low level when the output
level select P (OLSP) bit is 0, or high level when
the OLSP bit is 1. In the case of TOCS = 1, low
level when the OLS3N, OLS3P, OLS2N, OLS2P,
OLS1N, and OLS1P bits are 0 in TOCR2, or high
level when these bits are 1.)
This active level comparison is done when the
MTU2 output function or general output function is
selected in the pin function controller. If another
function is selected, the output level is not
checked.
Pin combinations for output comparison and high-
impedance control can be selected by POE2
registers.
high-impedance state when the pins
simultaneously output an active level for one or
more cycles of the peripheral clock (Pφ). (In the
case of TOCS = 0 in timer output control register
1S (TOCR1S) in the MTU2S, low level when the
output level select P (OLSP) bit is 0, or high level
when the OLSP bit is 1. In the case of TOCS = 1,
low level when the OLS3N, OLS3P, OLS2N,
OLS2P, OLS1N, and OLS1P bits are 0 in
TOCR2S, or high level when these bits are 1.)
This active level comparison is done when the
MTU2S output function or general output function
is selected in the pin function controller. If another
function is selected, the output level is not
checked.
Pin combinations for output comparison and high-
impedance control can be selected by POE2
registers.
Rev. 3.00 Mar. 04, 2009 Page 611 of 1168
REJ09B0344-0300