R0K572115S000BE Renesas Electronics America, R0K572115S000BE Datasheet - Page 994

• Manufacturer Part Number: R0K572115S000BE
• Description: KIT STARTER FOR SH7211
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: Microcontrollerr

Specifications of R0K572115S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7211
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(8)
Programming is performed by issuing a programming-selection command and the 256-byte
programming command.
Firstly, the host issues the programming-selection command to select the MAT to be programmed.
Two programming-selection commands are provided for the selection of either of the two target
areas.
1. Selection of user boot MAT programming
2. Selection of user MAT programming
Next, the host issues a 256-byte programming command. 256 bytes of data for programming by
the method selected by the preceding programming selection command are expected to follow the
command. To program more than 256 bytes, repeatedly issue 256-byte programming commands.
To terminate programming, the host should send another 256-byte programming command with
the address H'FFFFFFFF. On completion of programming, the boot program waits for the next
programming/erasure selection command.
To then program the other MAT, start by sending the programming select command.
The sequence of programming by programming-selection and 256-byte programming commands
is shown in figure 21.23.
Rev. 3.00 Mar. 04, 2009 Page 968 of 1168
REJ09B0344-0300
Programming
Repeat
Host
Figure 21.23 Sequence of Programming
256-byte programming (address and data)
256-byte programming (H'FFFFFFFF)
Programming selection (H'42, H'43)
ACK
ACK
ACK
Transfer the program
that performs
Boot program
programming
Programming