M306N4FGGP#U3 Renesas Electronics America, M306N4FGGP#U3 Datasheet - Page 223

• Manufacturer Part Number: M306N4FGGP#U3
• Description: IC M16C/6N4 MCU FLASH 100-LQFP
• Manufacturer: Renesas Electronics America
• Series: M16C™ M16C/6Nr

Specifications of M306N4FGGP#U3

• Core Processor: M16C/60
• Core Size: 16-Bit
• Speed: 24MHz
• Connectivity: CAN, I²C, IEBus, SIO, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 10K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 26x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-LQFP
• Package: 100LQFP
• Family Name: M16C
• Maximum Speed: 24 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16|32 Bit
• Number Of Programmable I/os: 87
• Interface Type: I2C/UART
• On-chip Adc: 26-chx10-bit
• On-chip Dac: 2-chx8-bit
• Number Of Timers: 11
• For Use With: R0K3306NKS001BE - KIT DEV RSK RSK-M16C/6NKR0K3306NKS000BE - KIT DEV RSK RSK-M16C/6NK
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

M16C/6N Group (M16C/6N4)
Rev.2.40
REJ09B0009-0240
Table 16.3 Repeat Mode Specifications
Function
A/D conversion
start condition
A/D conversion
stop condition
Interrupt request
generation timing
Analog input pin
Reading of result of
A/D converter
16.1.2 Repeat Mode
In repeat mode, analog voltage applied to a selected pin is repeatedly converted to a digital code.
Table 16.3 lists the Repeat Mode Specifications. Figure 16.5 shows Registers ADCON0 and ADCON1 in
Repeat Mode.
Apr 14, 2006
Item
page 199 of 376
the ADCON2 register, and bits OPA1 to OPA0 in the ADCON1 register select
a pin. Analog voltage applied to this pin is repeatedly converted to a digital
code.
• When the TRG bit in the ADCON0 register is 0 (software trigger)
• When the TRG bit is 1 (ADTRG trigger)
Set the ADST bit to 0 (A/D conversion halted)
None generated
Select one pin from AN0 to AN7, AN0_0 to AN0_7, AN2_0 to AN2_7,
ANEX0 to ANEX1
Read one of registers AD0 to AD7 that corresponds to the selected pin
Bits CH2 to CH0 in the ADCON0 register, bits ADGSEL1 to ADGSEL0 in
The ADST bit in the ADCON0 register is set to 1 (A/D conversion starts)
Input on the ADTRG pin changes state from high to low after the ADST
bit is set to 1 (A/D conversion starts)
_____________
_____________
Specification
16. A/D Converter