LPC2460FET208,551 NXP Semiconductors, LPC2460FET208,551 Datasheet - Page 283

• Manufacturer Part Number: LPC2460FET208,551
• Description: IC ARM7 MCU ROMLESS 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2460FET208,551

• Program Memory Type: ROMless
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2C/I2S/SPI/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, MCB2460, MCB2460U
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4260; 935283232551; LPC2460FET208-S

NXP Semiconductors
UM10237_4
User manual
4.3 Types of LCD panels supported
4.4 TFT panels
4.5 Color STN panels
The hardware cursor removes the requirement for this management by providing a
completely separate image buffer for the cursor, and superimposing the cursor image on
the LCD output stream at the current cursor (X,Y) coordinate.
To move the hardware cursor, the software driver supplies a new cursor coordinate. The
frame buffer requires no modification. This significantly reduces software overhead.
The cursor image is held in the LCD controller in an internal 256x32-bit buffer memory.
The LCD controller supports the following types of LCD panel:
TFT panels support one or more of the following color modes:
Each 16-bit palette entry is composed of 5 bpp (RGB), plus a common intensity bit. This
provides better memory utilization and performance compared with a full 6 bpp structure.
The total number of colors supported can be doubled from 32K to 64K if the intensity bit is
used and applied to all three color components simultaneously.
Alternatively, the 16 signals can be used to drive a 5:6:5 panel with the extra bit only
applied to the green channel.
Color STN panels support one or more of the following color modes:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Active matrix TFT panels with up to 24-bit bus interface.
Single-panel monochrome STN panels (4-bit and 8-bit bus interface).
Dual-panel monochrome STN panels (4-bit and 8-bit bus interface per panel).
Single-panel color STN panels, 8-bit bus interface.
Dual-panel color STN panels, 8-bit bus interface per panel.
1 bpp, palettized, 2 colors selected from available colors.
2 bpp, palettized, 4 colors selected from available colors.
4 bpp, palettized, 16 colors selected from available colors.
8 bpp, palettized, 256 colors selected from available colors.
12 bpp, direct 4:4:4 RGB.
16 bpp, direct 5:5:5 RGB, with 1 bpp not normally used. This pixel is still output, and
can be used as a brightness bit to connect to the Least Significant Bit (LSB) of RGB
components of a 6:6:6 TFT panel.
16 bpp, direct 5:6:5 RGB.
24 bpp, direct 8:8:8 RGB, providing over 16 million colors.
1 bpp, palettized, 2 colors selected from 3375.
2 bpp, palettized, 4 colors selected from 3375.
4 bpp, palettized, 16 colors selected from 3375.
8 bpp, palettized, 256 colors selected from 3375.
Rev. 04 — 26 August 2009
Chapter 12: LPC24XX LCD controller
UM10237
© NXP B.V. 2009. All rights reserved.
283 of 792