LPC2460FET208,551 NXP Semiconductors, LPC2460FET208,551 Datasheet - Page 70

• Manufacturer Part Number: LPC2460FET208,551
• Description: IC ARM7 MCU ROMLESS 208TFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC2400r

Specifications of LPC2460FET208,551

• Program Memory Type: ROMless
• Package / Case: 208-TFBGA
• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 72MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, Microwire, MMC, SPI, SSI, SSP, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 160
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 1x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC24
• Core: ARM7TDMI-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 98 KB
• Interface Type: CAN/I2C/I2S/SPI/SSP/UART/USB
• Maximum Clock Frequency: 72 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, MCB2460, MCB2460U
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• On-chip Dac: 1-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MCB2400U - BOARD EVAL MCB2400 + ULINK2MCB2400 - BOARD EVAL FOR NXP LPC246X SER
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 568-4260; 935283232551; LPC2460FET208-S

NXP Semiconductors
UM10237_4
User manual
Fig 15. EMC block diagram
5.1 AHB slave register interface
The functions of the EMC blocks are described in the following sections:
Note: For 32 bit wide chip selects data is transferred to and from dynamic memory in
SDRAM bursts of four. For 16 bit wide chip selects SDRAM bursts of eight are used.
The AHB slave register interface block enables the registers of the EMC to be
programmed. This module also contains most of the registers and performs the majority of
the register address decoding.
To eliminate the possibility of endianness problems, all data transfers to and from the
registers of the EMC must be 32 bits wide.
Note: If an access is attempted with a size other than a word (32 bits), it causes an
ERROR response to the AHB bus and the transfer is terminated.
•
•
•
•
•
AHB slave register interface.
AHB slave memory interfaces.
Data buffers.
Memory controller state machine.
Pad interface.
INTERFACE
INTERFACE
AHB SLAVE
AHB SLAVE
REGISTER
MEMORY
EMC
CONTROLLER
BUFFERS
MACHINE
MEMORY
STATE
DATA
Rev. 04 — 26 August 2009
Chapter 5: LPC24XX External Memory Controller (EMC)
A[23:0]
D[31:0]
WE
OE
BLS[3:0]
CS[3:0]
DYCS[3:0]
CAS
RAS
CLKOUT[1:0]
CKEOUT[3:0]
DQMOUT[3:0]
shared
signals
static
memory
signals
dynamic
memory
signals
UM10237
© NXP B.V. 2009. All rights reserved.
70 of 792