UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 1054

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
(c) GET_DESCRIPTOR() request
(d) GET_INTERFACE() request
If the subject descriptor has a length that is a multiple of wMaxPacketSize, a Null packet is returned to indicate
the end of the data stage. If the length of the descriptor at this time is less than the wLength value, the entire
descriptor is returned; if the length of the descriptor is greater than the wLength value, the descriptor up to the
wLength value is returned.
• Default state:
• Addressed state: The value stored in the UF0DDn register and UF0CIEm register is returned when the
• Configured state: The value stored in the UF0DDn register and UF0CIEm register is returned when the
A descriptor of up to 256 bytes can be stored in the UF0CIEm register. To return a descriptor of more than 256
bytes, set the CDCGDST bit of the UF0MODC register to 1 and process the GET_DESCRIPTOR() request by
FW.
Store the value of the total number of bytes of the descriptor set by the UF0CIEm register – 1 in the UF0
descriptor length register (UF0DSCL). The transfer data is controlled by the value of this data + 1 and wLength.
If either of wValue and wLength is other than that shown in Table 21-3, or if wIndex is other than that set by the
UF0 active interface number register (UF0AIFN), a STALL response is made in the data stage.
• Default state:
• Addressed state: A STALL response is made in the data stage when the GET_INTERFACE() request has
• Configured state: The value stored in the UF0 interface n register (UF0IFn) corresponding to the wIndex
The value stored in UF0 device descriptor register n (UF0DDn) and UF0
configuration/interface/endpoint descriptor register m (UF0CIEm) is returned (n = 0 to 17,
m = 0 to 255) when the GET_DESCRIPTOR() request has been received.
GET_DESCRIPTOR() request has been received.
GET_DESCRIPTOR() request has been received.
A STALL response is made in the data stage when the GET_INTERFACE() request has
been received.
been received.
value is returned (n = 0 to 4) when the GET_INTERFACE() request has been received.
CHAPTER 21 USB FUNCTION CONTROLLER (USBF)
Page 1054 of 1509