UPD70F3765GF-GAT-AX Renesas Electronics America, UPD70F3765GF-GAT-AX Datasheet - Page 1337

• Manufacturer Part Number: UPD70F3765GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3765GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
27.1 Functions
when oscillation of the main clock is stopped.
means other than reset.
Registers to Check Reset Source.
27.2 Configuration
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
The clock monitor samples the main clock by using the internal oscillation clock and generates a reset request signal
Once the operation of the clock monitor has been enabled by an operation enable flag, it cannot be cleared to 0 by any
When a reset by the clock monitor occurs, the RESF.CLMRF bit is set. For details on the RESF register, see 26.2
The clock monitor automatically stops under the following conditions.
The clock monitor includes the following hardware.
• During oscillation stabilization time after STOP mode is released
• When the main clock is stopped (from when the PCC.MCK bit = 1 during subclock operation, until the PCC.CLS bit =
• When the sampling clock (internal oscillation clock) is stopped
• When the CPU operates with the internal oscillation clock
0 during main clock operation)
Control register
Internal oscillation
Item
Main clock
clock
Figure 27-1. Timing of Reset via RESET Pin Input
Table 27-1. Configuration of Clock Monitor
CHAPTER 27 CLOCK MONITOR
Clock monitor mode register (CLM)
Clock monitor mode
register (CLM)
Enable/disable
CLME
Configuration
CHAPTER 27 CLOCK MONITOR
Internal reset signal
Page 1337 of 1509