MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 269

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

6.2.2.1.3
The external master control register selects the external master modes and determines the internal bus
attributes for external-to-internal accesses.
Freescale Semiconductor
16:19
21:22
24:27
28:30
Bits
8:15
0:7
20
23
31
MASKNUM
PARTNUM
External Master Control Register (EMCR)
Name
FLEN
ISB
—
—
—
—
—
This read-only field is mask programmed with a code corresponding to the part number of
the part on which the SIU is located. It is intended to help factory test and user code which
is sensitive to part changes. This changes when the part number changes. For example, it
would change if any new module is added, if the size of any memory module is changed. It
would not change if the part is changed to fix a bug in an existing module. The MPC561 has
an ID of 0x35. The MPC563 has an ID of 0x36.
This read-only field is mask programmed with a code corresponding to the mask number of
the part. It is intended to help factory test and user code which is sensitive to part changes.
Reserved
Flash enable is a read-write bit. The default state of FLEN is negated, meaning that the boot
is performed from external memory. This bit can be set at reset by the reset configuration
word.
0 On-chip Flash memory is disabled, and all internal cycles to the allocated Flash address
space are mapped to external memory
1 On-chip Flash memory is enabled
Reserved
Reserved. This bit should be programmed to 0 at all times.
Reserved
This read-write field defines the base address of the internal memory space. The initial value
of this field can be configured at reset to one of eight addresses, and then can be changed
to any value by software. Internal base addresses are as follows:
000 0x0000 0000
001 0x0040 0000
010 0x0080 0000
011 0x00C0 0000
100 0x0100 0000
101 0x0140 0000
110 0x0180 0000
111 0x01C0 0000
Reserved
MPC561/MPC563 Reference Manual, Rev. 1.2
Table 6-12. IMMR Bit Descriptions
Description
System Configuration and Protection
6-29