MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 300

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Reset
7-12
20
13:14
17:18
Bits
9:10
15
4:5
6:8
11
12
16
19
21
22
23
2
,
1
3
DBGC[0:1] Debug Pins Configuration — See
COMP
COMP
ATWC
PRPM
Name
EBDF
ETRE
FLEN
EXC_
BPS
EN_
SC
—
—
—
—
4
4
Boot Port Size — This field defines the port size of the boot device on reset (BR0[PS]). If a write
to the OR0 register occurs after reset this field definition is ignored. See
Table 10-8
00 32-bit port (default)
01 8-bit port
10 16-bit port
11 Reserved
Reserved. These bits must not be high in the reset configuration word.
(SIUMCR),” for this field definition. The default value is that these pins function as: VFLS[0:1], BI,
BR, BG and BB. See
Reserved.
Address Type Write Enable Configuration — The default value is that these pins function as WE
pins. See
0 WE[0:3]/BE[0:3]/AT[0:3] functions as WE[0:3]/BE[0:3]
1 WE[0:3]/BE[0:3]/AT[0:3] functions as AT[0:3]
External Bus Division Factor — This field defines the initial value of the external bus frequency.
The default value is that CLKOUT frequency is equal to that of the internal clock (no division).
See
Reserved. This bit must be 0 in the reset configuration word.
Peripheral Mode Enable — This bit determines if the chip is in peripheral mode. A detailed
description is in
Single Chip Select — This field defines the mode of theMPC562/MPC564. See
00 Extended chip, 32 bits data
01 Extended chip, 16 bits data
10 Single chip and show cycles (address)
11 Single chip
Exception Table Relocation Enable — This field defines whether the Exception Table Relocation
feature in the BBC is enabled or disabled; The default state for this field is disabled. For more
details, see
Flash Enable — This field determines whether the on-chip Flash memory is enabled or disabled
out of reset. The default state is disabled, which means that by default, the boot is from external
memory. Refer to
0 Flash disabled — boot is from external memory
1 Flash enabled
Enable Compression — This bit enables the operation of the MPC562/MPC564 with compressed
code. The default state is disabled. See
“MPC562/MPC564 Compression Features."
Exception Compression — This bit determines the operation of the MPC562/MPC564 with
exceptions. If this bit is set, then the MPC562/MPC564 assumes that ALL the exception routines
are in compressed code. The default indicates the exceptions are all non-compressed. See
Table 4-4
Reserved. This bit must not be high in the reset configuration word.
Table
and <XrefBlue>Appendix A, “MPC562/MPC564 Compression Features."
Table 7-5. RCW Bit Descriptions (continued)
Table
8-9.
for more information.
Table
MPC561/MPC563 Reference Manual, Rev. 1.2
6-7.
Table 6-13
Table 6-12
4-4.
Table
The default value is no peripheral mode enabled.
6-8.
for more details.
Section 6.2.2.1.1, “SIU Module Configuration Register
Table 4-4
Description
and <XrefBlue>Appendix A,
Table 10-5
Freescale Semiconductor
Table
and
6-10.