MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 627

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

15.4.7
The QTEST register is used for factory testing of the MCU.
15.4.8
The QDSCI_ILI and QSPI_IL registers determine the interrupt level requested by the QSMCM. The two
SCI submodules (DSCI) share a 5-bit interrupt level field, ILDSCI. The QSPI uses a separate field,
ILQSPI. The level value is used to determine which interrupt is serviced first when two or more modules
or external peripherals simultaneously request an interrupt. The user can select among 32 levels. This
register can be accessed only when the CPU is in supervisor mode.
Freescale Semiconductor
SRESET
12:15
Bits
9:11
Bits
8:15
Field
Addr
2:7
0:2
3:7
0
1
8
QSMCM Test Register (QTEST)
QSMCM Interrupt Level Registers (QDSCI_IL, QSPI_IL)
MSB
0
ILDSCI
Name
STOP
SUPV
Name
FRZ1
—
—
—
—
—
—
Figure 15-5. QSM2 Dual SCI Interrupt Level Register (QDSCI_IL)
1
2
Stop enable. Refer to
0 Normal clock operation
1 Internal clocks stopped
Freeze1 bit. Refer to
0 Ignore the FREEZE signal
1 Halt the QSMCM (on transfer boundary)
Reserved
Supervisor / Unrestricted. Refer to
0 Assigned registers are unrestricted (user access allowed)
1 Assigned registers are restricted (only supervisor access allowed)
Reserved
Reserved. These bits are used for the IARB (interrupt arbitration ID) field in QSM
implementations that use hardware interrupt arbitration.
Reserved
Interrupt level of Dual SCIs
00000lowest interrupt level request (level 0)
11111highest interrupt level request (level 31)
Reserved
Table 15-4. QSMCMMCR Bit Descriptions
MPC561/MPC563 Reference Manual, Rev. 1.2
Table 15-5. QDSCI_IL Bit Descriptions
3
4
ILDSCI
5
Section 15.4.2, “Freeze
Section 15.4.1, “Low-Power Stop
0000_0000_0000_0000
6
0x30 5004
Section 15.4.3, “Access
7
Description
Description
8
Operation.”
9
10
Operation.”
Queued Serial Multi-Channel Module
Protection.”
11
—
12
13
14
LSB
15
15-9