MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 625

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Because the QSMCM contains a mix of supervisor and user registers, AACK is asserted for either
supervisor or user mode accesses, and the bus cycle remains internal. If a supervisor-only register is
accessed in user mode, the module responds as if an access had been made to an unauthorized register
location, and a bus error is generated.
15.4.4
The interrupt structure of the IMB3 supports a total of 32 interrupt levels that are time multiplexed on the
IRQB[0:7] lines as seen in
In this structure, all interrupt sources place their asserted level on a time multiplexed bus during four
different time slots, with eight levels communicated per slot. The ILBS[0:1] signals indicate which group
of eight are being driven on the interrupt request lines.
The QSMCM module is capable of generating one of the 32 possible interrupt levels on the IMB3. The
levels that the interrupt will drive can be programmed into the interrupt request level (ILDSCI and
ILQSPI) bits located in the interrupt configuration register (QDSCI_IL and QSPI_IL). This value
determines which interrupt signal (IRQB[0:7]) is driven onto the bus during the programmed time slot.
Figure 15-3
Freescale Semiconductor
IMB3 CLOCK
IMB3 IRQ[7:0]
QSMCM Interrupts
shows a block diagram of the interrupt hardware.
ILBS[0:1]
Figure
00
MPC561/MPC563 Reference Manual, Rev. 1.2
15-2.
Figure 15-2. QSMCM Interrupt Levels
01
IRQ
Table 15-3. Interrupt Levels
7:0
ILBS[0:1]
00
01
10
11
10
IRQ
15:8
23:16
11
IRQ
Levels
16:23
24:31
8:15
0:7
31:24
00
IRQ
01
IRQ
7:0
10
Queued Serial Multi-Channel Module
11
15-7