HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 121

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

3.2.2
SYSCR selects a system pin function, monitors a reset source, selects the interrupt control mode
and the detection edge for NMI, pin location selection, enables or disables register access to the
on-chip peripheral modules, and enables or disables on-chip RAM address space.
Bit
7
6
5
4
3
Bit Name
CS2E
IOSE
INTM1
INTM0
XRST
System Control Register (SYSCR)
Initial Value
0
0
0
0
1
R/W
R/W
R/W
R
R/W
R
Description
Chip Select 2 Enable
Specifies the location of the control pin (CS2) of the
host interface together with the FGA20E bit in HICR.
See section 18, Host Interface X-Bus Interface (XBS),
for details.
IOS Enable
Enables or disables AS/IOS pin function in extended
mode.
0: AS pin
1: IOS pin
These bits select the control mode of the interrupt
controller. For details on the interrupt control modes
and interrupt control select modes 1 and 0, see section
5.6, Interrupt Control Modes and Interrupt Operation.
00: Interrupt control mode 0
01: Interrupt control mode 1
10: Setting prohibited
11: Setting prohibited
External Reset
This bit indicates the reset source. A reset is caused
by an external reset input, or when the watchdog timer
overflows.
0: A reset is caused when the watchdog timer
1: A reset is caused by an external reset.
Outputs low when an external area is accessed.
Outputs low when a specified address of addresses
H'(FF)F000 to H'(FF)F7FF is accessed.
overflows.
Rev. 3.00 Mar 21, 2006 page 65 of 788
Section 3 MCU Operating Modes
REJ09B0300-0300