HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 432

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI and IrDA)
15.4
Figure 15.2 shows the general format for asynchronous serial communication. One frame consists
of a start bit (low level), followed by transmit/receive data, a parity bit, and finally stop bits (high
level). In asynchronous serial communication, the transmission line is usually held in the mark
state (high level). The SCI monitors the transmission line, and when it goes to the space state (low
level), recognizes a start bit and starts serial communication. Inside the SCI, the transmitter and
receiver are independent units, enabling full-duplex communication. Both the transmitter and the
receiver also have a double-buffered structure, so that data can be read or written during
transmission or reception, enabling continuous data transfer and reception.
Rev. 3.00 Mar 21, 2006 page 376 of 788
REJ09B0300-0300
Serial
data
Operation in Asynchronous Mode
1
Start
bit
1 bit
Figure 15.2 Data Format in Asynchronous Communication
0
LSB
D0
(Example with 8-Bit Data, Parity, Two Stop Bits)
One unit of transfer data (character or frame)
D1
D2
Transmit/receive data
D3
7 or 8 bits
D4
D5
D6
MSB
D7
Parity
bit
1 bit or
none
0/1
Stop bit
1
1 or 2 bits
1
(mark state)
Idle state
1