HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 421

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Legend:
X:
Bit
3
2
1
0
Don’t care
Bit Name
MPIE
TEIE
CKE1
CKE0
Initial Value
0
0
0
0
R/W
R/W
R/W
R/W
R/W
Section 15 Serial Communication Interface (SCI and IrDA)
Description
Multiprocessor Interrupt Enable (enabled only when the
MP bit in SMR is 1 in asynchronous mode)
When this bit is set to 1, receive data in which the
multiprocessor bit is 0 is skipped, and setting of the
RDRF, FER, and ORER status flags in SSR is
disabled. On receiving data in which the multiprocessor
bit is 1, this bit is automatically cleared and normal
reception is resumed. For details, refer to section 15.5,
Multiprocessor Communication Function.
Transmit End Interrupt Enable
When this bit is set to 1, a TEI interrupt request is
enabled.
Clock Enable 1, 0
These bits select the clock source and SCK pin
function.
Asynchronous mode
00: Internal clock
(SCK pin functions as I/O port.)
01: Internal clock
(Outputs a clock of the same frequency as the bit rate
from the SCK pin.)
1X: External clock
(Inputs a clock with a frequency 16 times the bit rate
from the SCK pin.)
Clocked synchronous mode
0X: Internal clock (SCK pin functions as clock output.)
1X: External clock (SCK pin functions as clock input.)
Rev. 3.00 Mar 21, 2006 page 365 of 788
REJ09B0300-0300