HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 411

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

14.4.3
When TCNT overflows in watchdog timer mode, the OVF bit in TCSR is set to 1. When the
RST/NMI bit is 1 here, the internal reset signal is generated for the entire LSI. At the same time,
the low level signal is output from the RESO pin. The timing is shown in figure 14.5.
14.5
During interval timer mode operation, an overflow generates an interval timer interrupt (WOVI).
The interval timer interrupt is requested whenever the OVF flag is set to 1 in TCSR. OVF must be
cleared to 0 in the interrupt handling routine.
When the NMI interrupt request is selected in watchdog timer mode, an NMI interrupt request is
generated by an overflow.
Table 14.2 WDT Interrupt Source
Name
WOVI
TCNT
Overflow signal
(internal signal)
OVF
RESO signal
Internal reset
signal
RESO
RESO Signal Output Timing
Interrupt Sources
RESO
RESO
Interrupt Source
TCNT overflow
Figure 14.5 Output Timing of RESO
H'FF
Interrupt Flag
OVF
Rev. 3.00 Mar 21, 2006 page 355 of 788
RESO
RESO
RESO signal
132 states
Section 14 Watchdog Timer (WDT)
518 states
H'00
DTC Activation
Not possible
REJ09B0300-0300