HD64F2145BTE20 Renesas Electronics America, HD64F2145BTE20 Datasheet - Page 564

• Manufacturer Part Number: HD64F2145BTE20
• Description: IC H8S MCU FLASH 256K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of HD64F2145BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 17 Keyboard Buffer Controller
17.5
17.5.1
When KBIOE is 0, the internal KCLK and internal KD settings are fixed at 1. Therefore, if the
KCLK pin is low when the KBIOE bit is set to 1, the edge detection circuit operates and the
KCLK falling edge is detected.
If the KBFSEL bit and KBE bit are both 0 at this time, the KBF bit is set. Figure 17.14 shows the
timing of KBIOE setting and KCLK falling edge detection.
17.5.2
Keyboard buffer controller operation can be enabled or disabled using the module stop control
register. The initial setting is for keyboard buffer controller operation to be halted. Register access
is enabled by canceling module stop mode. For details, refer to section 26, Power-Down Modes.
Rev. 3.00 Mar 21, 2006 page 508 of 788
REJ09B0300-0300
KCLK (pin)
Internal KCLK
(KCLKI)
KBIOE
Falling edge
signal
KBFSEL
KBE
KBF
Usage Notes
KBIOE Setting and KCLK Falling Edge Detection
Module Stop Mode Setting
Figure 17.14 KBIOE Setting and KCLK Falling Edge Detection Timing
T1
T2