IPR-PCI/MT32 Altera, IPR-PCI/MT32 Datasheet - Page 247

• Manufacturer Part Number: IPR-PCI/MT32
• Description: IP CORE Renewal Of IP-PCI/MT32
• Manufacturer: Altera
• Type: MegaCorer

Specifications of IPR-PCI/MT32

• Software Application: IP CORE, Interface And Protocols, PCI
• Supported Families: Arria GX, Arria II GX, Cyclone, Stratix
• Core Architecture: FPGA
• Core Sub-architecture: Arria, Cyclone, Stratix
• Rohs Compliant: NA
• Function: PCI Compiler, Master/Target, 32 bit
• License: Renewal License
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na

Compile the
Design
Altera Corporation
January 2011
f
■
■
■
■
■
Compile your design in the Quartus II software. Refer to Quartus II Help
for instructions on performing compilation.
Altera provides constraint files to ensure that the PCI MegaCore function
achieves PCI specification timing requirements in Altera devices. This
walkthrough incorporates a constraint file included with PCI Compiler.
For more information on using Altera-provided constraint files in your
design, refer to
For this walkthrough perform the following steps:
1.
2.
3.
Configuration read operations on command registers BAR0 and
BAR1 of the Altera PCI MegaCore function, followed by
configuration read operations on BAR0 and BAR1 of the PCI
testbench trgt_tranx.
You can view the following PCI transactions in the ModelSim
Wave - Default window if you made the additions to the mstr_tranx
file.
A 32-bit burst memory write operation to the on-chip memory.
A 32-bit burst memory read operation to the on-chip memory.
Configure DMA to perform burst memory read transaction to move
data from the PCI testbench trgt_tranx to on-chip memory.
Configure DMA to perform burst memory write transaction to move
data from the on-chip memory to PCI testbench trgt_tranx.
Open c:\sopc_pci\chip_top.qpf (the chip_top project) in the
Quartus II software.
1
Choose Utility Windows > Tcl Console (View menu).
Source the generated constraint file by typing the following
commands at the Quartus II Tcl Console command prompt:
source pci_constraints_for_pci_compiler.tcl r
add_pci_constraints -pin_suffix _pci_compiler r
PCI Compiler Version 10.1
This is the same project you created in
SOPC Builder Flow Design Walkthrough” on page
Appendix A, Using PCI Constraint File Tcl
PCI Compiler User Guide
“PCI Compiler with
Getting Started
Scripts.
5–2.
5–13