MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 151

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

EFI BIOS Setup—MPCBL0050
7.3.6
Table 58.
7.3.7
Table 59.
September 2007
Order Number: 318146-001
USB Configuration Submenu
To access this submenu, select Advanced on the menu bar, then USB Configuration.
The USB configuration options are given in
USB configuration submenu options
PCI Configuration Submenu
To access this submenu, select Advanced on the menu bar, then PCI Submenu. The
PCI configuration options are given in
On-board PCI device settings (Sheet 1 of 2)
USB Devices Enabled
USB Controller
Legacy USB Support
Device Reset Timeout
USB 2.0 Controller
Note:
PCI memory mapped
I/O
Memory Mapped I/O
above 4GB
Onboard ports A and B
option ROM
Onboard ports C/D/E
and F option ROM
NIC MAC Address
Feature
Bold text indicates default setting.
Feature
1.5GB
1.75GB
2.00GB
2.25GB
2.5GB
2.75GB
3.00GB
3.25GB
3.50GB
Enabled /
Disabled
Enabled/
Disabled
Enabled/
Disabled
Info Only
Options
Info Only
Enabled/
Disabled
Enabled/
Auto
10 sec
20 sec
30 sec
40 sec
Enabled/
Disabled
Options
Select the start of the reserved memory region for PCI memory
mapped I/O space that ends at 4GB.
Warning: Depending on the system configuration, this option may
impact the amount of system memory detected by an OS without
Physical Address Extension (PAE) support.
For all PAE (Physical Address Extension) aware Operating Systems,
2.5GB should be selected. The system will remap memory and the OS
will detect all memory installed in the system. If the installed OS does
not support PAE, the maximum memory size detected is linked to the
setup option selected.
will be detected by the OS.
Enable or disable memory mapped I/O of 64-bit PCI devices to 4GB or
greater address space.
Enables Option ROM for base interface (PICMG) Gigabit Ethernet LAN
Controller [Ports A & B)
Enables Option ROM for fabric interface (PICMG) Gigabit Ethernet LAN
Controller [Ports C, D, E & F)
Displays MAC addresses of all available Gigabit Ethernet LAN ports
Displays the number of USB devices detected by EFI BIOS
Enable USB host controller
PS/2 emulation for USB keyboard and USB mouse devices.
[Auto] - Legacy USB support will be enabled if a USB device is
attached.
USB Mass storage device Start Unit command timeout
Onboard USB ports will be enabled to support USB 2.0 mode.
USB devices will operate in USB 1.1 mode during POST.
Table
Table
Intel NetStructure
59.
58.
For example, if 2.5GB is selected, only 2.5GB
Description
Description
®
MPCBL0050 Single Board Computer
Technical Product Specification
151