MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 24

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Table 3.
Table 4.
2.2.5
2.2.5.1
Intel NetStructure
Technical Product Specification
24
®
DIMM memory features
Supported memory configurations
Refer to
DIMM installation considerations:
Refer to the MPCBL0050 Compatibility Report for a list of DIMMs validated for the
board.
I/O
Gigabit Ethernet
The MPCBL0050 SBC implements six Gigabit Ethernet (GbE) interfaces. Two of these
are supported by Intel
interface on the AdvancedTCA backplane to support PICMG* 3.0 (base). The remaining
four are supported with two Intel
routed to the fabric interface on the AdvancedTCA backplane to support the 3.1 option
2 (fabric) specifications.
The user has the flexibility to route two of the fabric interface GbE ports (Port 1,
Channel 1 & 2) to the front panel instead of the backplane fabric interface. It is also
possible to route all four fabric interface GbE ports to the RTM connector for rear access
external connectivity. This can be done by sending an OEM IPMI command via the Shelf
Manager or by changing the direction in EFI BIOS. Both ways require a payload reset
for the direction change to take effect.
DIMM slots
Rank Structure
Max DIMM speed
Device width
4 GBytes
8 GBytes
16 GBytes
Total Memory
• DIMMs must be installed in matching pairs.
• DIMMs must be identical in rank, size, device width, and memory timing.
• If only two DIMMs are used, they must be installed in slots U28 and U29 only. With
MPCBL0050 Single Board Computer
only 2 DIMMs, only half the memory bandwidth can be achieved (2GB/s instead of
4GB/s).
Feature
Section 4.5
1 GByte FBDIMM
DDR2
2 GByte FBDIMM
DDR2
4 GByte FBDIMM
DDR2
U28 (DIMM1)
Channel0
Four
Single or Dual
533MHz (note that 667Mhz modules can be used with the
MPCBL0050, but they will still operate at 533Mhz)
x4 or x8
Branch0
for details on the memory installation procedure.
®
6321ESB and Intel
1 GByte FBDIMM
DDR2
2 GByte FBDIMM
DDR2
4 GByte FBDIMM
DDR2
U29 (DIMM2)
Channel1
®
Branch0
82571EB Gigabit Ethernet Controllers and are
Parameter
®
1 GByte FBDIMM
DDR2
2 GByte FBDIMM
DDR2
4 GByte FBDIMM
DDR2
82563EB PHY and are routed to the base
U30 (DIMM3)
Channel2
Branch1
1 GByte FBDIMM
DDR2
2 GByte FBDIMM
DDR2
4 GByte FBDIMM
DDR2
MPCBL0050—Feature Overview
U31 (DIMM4)
Channel3
Branch1
Order Number: 318146-001
September 2007