MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 40

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Table 9.
Intel NetStructure
Technical Product Specification
40
®
Front panel LED descriptions (Sheet 2 of 2)
SAS Ports Activity
MPCBL0050 Single Board Computer
Ports A, B, C, D
Link/Activity
Ports E & F
Ports E & F
Link Speed
Activity
Health
LED
Function: Health (AdvancedTCA LED 2). The SBC health is based on an aggregation of
IPMI sensors, like board temperature and voltage.
GREEN: The SBC is healthy.
RED: The SBC is not healthy.
It is possible for the user to override the default IPMC behavior of the LED using
AdvancedTCA FRU LED Control commands.
Possible States: OFF / GREEN / RED / AMBER
Function: Alarm LED (AdvancedTCA LED 3). This LED is user-defined and in off state by
default. The LED’s default IPMC behavior can be overridden with AdvancedTCA FRU LED
Control commands.
Possible States: OFF / AMBER
There is one LED that indicates link and activity for the following ports:
Function: Gigabit Ethernet Base/Fabric Interface Link and Activity
OFF: No Link
GREEN: Link
GREEN-BLINK: Link and Activity
There is one LED that indicates link speed for the following ports:
Function: Gigabit Ethernet Fabric Interface Link Speed
OFF: 10 Mb/s
GREEN: 100 Mb/s
AMBER: 1000 Mb/s
Note: This LED will be active even if Ethernet port is connected to the backplane fabric
interface. This will show status of Fabric Interface ports on the backplane.
There is one LED that indicates activity for the following ports:
Function: Gigabit Ethernet Fabric Interface Link Activity:
GREEN-NO BLINKING: No traffic
GREEN-BLINKING: Transmit or receive traffic is coming across the link
Note: This LED will be active even if Ethernet port is connected to the backplane fabric
interface.
Function: SAS controller ports activity.
0/1/2: SAS ports 0/1/2 - connected to the RTM
3: SAS Port 3- connected to AdvancedMC
OFF: No traffic on SAS ports
BLINKING GREEN: Traffic on SAS ports (read/write activity)
• A: Base Interface: Channel 1, Port 0
• B: Base Interface: Channel 2, Port 0
• C: Fabric Interface: Channel 1, Port 0
• D: Fabric Interface: Channel 2, Port 0
• E: Fabric Interface: Channel 1, Port 1
• F: Fabric Interface: Channel 2, Port 1
• E: Fabric Interface: Channel 1, Port 1
• F: Fabric Interface: Channel 2, Port 1
Function
MPCBL0050—Connectors and LEDs
Order Number: 318146-001
September 2007