MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 62

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Figure 24.
Note:
4.6
Note:
4.7
Intel NetStructure
Technical Product Specification
62
®
Latches left in the closed (correct) position
Memory modules are not included with the MPCBL0050 board and must be purchased
separately. Refer to the MPCBL0050 Compatibility Report for a list of devices validated.
Rear Transition Module (RTM) Installation
In order to boot the MPCBL0050 from SAS HDD provided on MPRTM0050 install the
Rear Transition module as follows:
The MPRTM0050 is not included with the MPCBL0050 board and must be purchased
separately. Refer to the MPCBL0050 Compatibility Report for a list of devices validated.
Digital Ground to Chassis Ground Connectivity
By default, the board is shipped with the digital ground connected to the chassis
ground by a metal standoff.
1. Install the MPRTM0050 Rear Transition Module from the rear of the chassis.
2. Close the RTM ejector handles and tighten the RTM faceplate screws so the board is
3. Install the MPCBL0050 SBC from the front of the chassis according to the
MPCBL0050 Single Board Computer
firmly seated in the chassis.
installation notes in
Section
4.2.
MPCBL0050—Operating the Unit
Order Number: 318146-001
September 2007