MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 170

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Table 70.
9.8
9.8.1
9.8.1.1
Note:
Intel NetStructure
Technical Product Specification
170
®
SOL configuration reference script command-line options (Continued)
Setting up a Serial Over LAN Session
Target Blade Setup
The target blade is the SOL blade that sends the serial data to the client.
Ensure that the MPCBL0050 SBC has the following firmware/OS versions loaded:
EFI BIOS Configuration
Configure the target blade EFI BIOS baud rate so that it is set to 9600. All examples in
this document reflect a baud rate of 9600.
Configure the EFI BIOS on the SOL Target Blade as follows (refer also to
If the default EFI BIOS baud rate is changed to a baud rate other than 9600, then the
reference_cfg script will need to be changed to match the same baud rate.
1. When the blade starts booting, press F4 from HyperTerminal (or equivalent
2. Choose the Server Management menu.
3. Choose the Console Redirection menu.
4. Change Serial Port Mode to the 9600 baud rate if it is not already set to that
5. Press Esc.
6. Choose Save and Exit.
• IPMC Firmware 1.02.00 or later
• EFI BIOS 1.02.00 or later
•
• MontaVista* 4.0 LSP, Red Hat* RHEL 4.0 U4
MPCBL0050 Single Board Computer
Option
-U
-P
-A
-?
sbcutilities
terminal program) to enter EFI BIOS setup menu.
Change the Flow Control parameter to “RTS/CTS”.
speed.
“User” - Specifies the username for establishing the RMCP sessions. If not specified, the default
value root is used.
“Password” - Password for establishing RMCP sessions. If not specified, the default value
cmmrootpass is used.
“Authorization” - Authorization type for establishing the RMCP sessions. One of
{none|straight|md2|md5}.
Print the message and quit.
1.3.6.6 or later
Meaning
MPCBL0050—Serial Over LAN
Order Number: 318146-001
Figure
September 2007
39):