MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 174

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

9.8.2
Note:
Intel NetStructure
Technical Product Specification
174
®
Client Blade Setup
The client blade is the SOL blade that will activate SOL on the target and receive serial
output from the target. The output is displayed on the client console.
Ensure that the MPCBL0050 SBC has the following firmware/OS versions loaded:
ipmitool needs to be installed on a Linux* computer and that computer can be located
anywhere in the network. In the example described in this section, ipmitool is running
on another blade in the same chassis.
3. If the configuration script is successful, an output similar to the following is
• IPMC Firmware 1.02.00 or later
• EFI BIOS 1.02.0.. or later
• System must be running a Linux* OS
• ipmitool 1.8.7 or later running on the client blade
MPCBL0050 Single Board Computer
displayed on the console. Once the configuration has been successfully written to
the SOL target blade, it is ready for a user to activate the SOL session from the
client blade.
a. Transfer the /usr/bin/reference_cfg and /usr/lib/sbcutils/reference_funcs
files to the remote computer using FTP.
b. Transfer the /usr/share/doc/sbcutils/cmdPrivilege.ini file to both the active
and standby CMMs. Place the cmdPrivelege.ini file in the
/etc/ directory. This file is needed to set up RMCP.
c. Reboot both CMMs.
d. Once the CMMs have booted, from the remote computer execute the
following command:
cmmget -l blade14 -t raw -d "0x06 0x41 1 0x80"
reference_cfg: Data response "0x2A 0x03"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x01 0x01"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x02 0x03"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x03 0x07 0x2A"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x04 0x03 0x0A"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x05 0x06"
reference_cfg: Success
cmmget -l blade14 -t raw -d "0x0C 0x21 1 0x06 0x06"
reference_cfg: Success
reference_cfg -I lan
-j <Gateway IP Addr> -n <Gateway MAC Addr>
-l <SOL Target IPMB Addr> -H <CMM IP Addr>
-U root -P cmmrootpass -A md5
-g -i <SOL Target IP Addr>
MPCBL0050—Serial Over LAN
Order Number: 318146-001
September 2007