MPCBL0050N02Q Intel, MPCBL0050N02Q Datasheet - Page 213

• Manufacturer Part Number: MPCBL0050N02Q
• Manufacturer: Intel

Specifications of MPCBL0050N02Q

• Lead Free Status / RoHS Status: Supplier Unconfirmed

Firmware Update Utilities—MPCBL0050
10.6.15.3
10.6.16
10.6.17
September 2007
Order Number: 318146-001
SDR Update via RMCP Bridge
To perform an SDR update via an RMCP bridge, use the supplied SDR file from the
release package for your target ICMP. To run the command over an RMCP bridge, you
must have a shelf manager (an Intel NetStructure
Management Module) that bridges IPMB traffic. The shelf manager must be connected
to the network so that it can transmit TCP/IP traffic to and from the client. The interface
selected must be lan, since the KCS interface is assumed otherwise.
The syntax of the command used to execute an MPCBL0050 SDR update is as follows:
For example:
RTM SDR Update via RMCP Bridge
To perform an RTM SDR update via RMCP bridge, you must specify the target blade as
well as the RTM.
The syntax of RTM SDR update via RMCP bridge command is as follows:
For example:
Writing Asset Tag Information
To write asset tag information, execute the following command:
You are prompted for an asset number, which consists of one to 20 alphanumeric
characters. This string is written to the device targeted in the command (IPMC or RTM)
over the specified interface (or over KCS if no interface is specified).
The following is an example of writing asset tag information:
The output from the command should be similar to the following:
Enter value for PRODUCT Asset Tag (Maximum length allowed is 20 characters):
-Your data entered-
Writing FRU - ADDR(0x20) ID(0) Bus(0)
Writing FRU Product Info Area
Verifying contents of FRU
Program exiting!
# sbcupdate -I kcs -t rtm MPRTM0050_NNN.sdr
# sbcupdate -I lan -H <shelf_manager_ip_address>
# sbcupdate -I lan -H 10.90.90.91 -U root -P cmmrootpass
# sbcupdate -I lan -H <shelf_manager_IP_address>
# sbcupdate -I lan -H 10.90.90.91 -U root -P cmmrootpass
sbcupdate [-i <interface>] [-t <target>]
# sbcupdate -I kcs /usr/share/doc/sbcutils/asset.cfg
-U <RMCP_username> -P <RMCP_password> -t <target>
MPCBL0050_NNN.sdr
-t 0x8e MPCBL0050_NNN.sdr
-U <RMCP_username> -P <RMCP_password>
-t <target blade>:rtm MPRTM0050_NNN.sdr
-t 0x8e:rtm MPRTM0050_NNN.sdr
/usr/share/doc/sbcutils/asset.cfg
Intel NetStructure
®
MPCMM0001/0002 Chassis
®
MPCBL0050 Single Board Computer
Technical Product Specification
213