HD64F2676VFC33 Renesas Electronics America, HD64F2676VFC33 Datasheet - Page 276

• Manufacturer Part Number: HD64F2676VFC33
• Description: IC H8S MCU FLASH 256K 144-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2600r

Specifications of HD64F2676VFC33

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: IrDA, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 103
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 4x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 6 Bus Controller (BSC)
6.7.15
When burst mode is selected on the synchronous DRAM interface, the DACK and EDACK output
timing can be selected with the DDS and EDDS bits in DRAMCR. When continuous synchronous
DRAM space is accessed in DMAC/EXDMAC single address mode at the same time, these bits
select whether or not burst access is to be performed. The establishment time for the read data can
be extended in the clock suspend mode irrespective of the settings of the DDS and EDDS bits.
(1) Output Timing of DACK
When DDS = 1 or EDDS = 1: Burst access is performed by determining the address only,
irrespective of the bus master. With the synchronous DRAM interface, the DACK or EDACK
output goes low from the T
Figure 6.60 shows the DACK or EDACK output timing for the synchronous DRAM interface
when DDS = 1 or EDDS = 1.
Rev. 3.00 Mar 17, 2006 page 224 of 926
REJ09B0283-0300
Interface
DMAC and EXDMAC Single Address Transfer Mode and Synchronous DRAM
DACK
DACK or EDACK
DACK
c1
state.
EDACK
EDACK
EDACK